Fixed Number of Iterations

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a test that performs a fixed number of iterations without testing for convergence. This test is useful for hybrid simulation where the residual error is corrected for. It can only be used in combination with certain implicit integration methods that are specialized for hybrid simulation (such as NewmarkHSFixedNumIter, HHTHSFixedNumIter, CollocationHSFixedNumIter).

test FixedNumIter $iter <$pFlag> <$nType>

---

$iter	the max number of iterations to perform
$pFlag	optional print flag, default is 0. valid options:
	0 print nothing
	1 print information on energy norm each time test() is invoked
	2 print information on energy norm and number of iterations at end of successful test
	4 at each step it will print the energy norm and also the <math>\Delta U</math> and <math>R(U)</math> vectors.
$nType	optional type of norm, default is 2. (0 = max-norm, 1 = 1-norm, 2 = 2-norm, ...)

---

Code Developed by: Andreas Schellenberg, University of California, Berkeley.