UniaxialMaterialCommand

• Sensitivity_Command_Manual
  • General Commands
    • reliability
    • parameter
    • addToParameter
    • updateParameter
    • sensitivityIntegrator
    • sensitivityAlgorithm
    • recorder
  • Material Commands
    • uniaxialMaterial
    • nDmaterial
  • Section Commands
    • Fiber
    • Elastic
    • Aggregator
  • Element Commands
    • dispBeamColumnWithSensitivity
    • quadWithSensitivity
    • bbarBrickWithSensitivity
  • Constraint Commands
    • Transformation

---

SteelMP

This command is used to construct a uniaxial Menegotto-Pinto steel material object.

SmoothPSConcrete

This command is used to construct a uniaxial smoothed Popovics-Saenz concrete material object.

UniaxialJ2Plasticity

This command is used to construct a uniaxial J2 Plasticity material object with isotropic and kinematic hardening.

Hardening

This command is used to construct a uniaxial material object with combined linear kinematic and isotropic hardening.

Concrete01

This command is used to construct a uniaxial Kent-Scott-Park concrete material object with degraded linear unloading/reloading stiffness according to the work of Karsan-Jirsa and no tensile strength (refer to http://peer.berkeley.edu).

Steel01

This command is used to construct a uniaxial bilinear steel material object with kinematic hardening and optional isotropic hardening described by a non-linear evolution equation (refer to http://peer.berkeley.edu).

Elastic

This command is used to construct a linear elastic uniaxial material object (with optional material damping).