Elastic Beam Column Element

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct an elasticBeamColumn element object. The arguments for the construction of an elastic beam-column element depend on the dimension of the problem, ndm:

For a two-dimensional problem:

element elasticBeamColumn $eleTag $iNode $jNode $A $E $Iz $transfTag

For a three-dimensional problem:

element elasticBeamColumn $eleTag $iNode $jNode $A $E $G $J $Iy $Iz $transfTag

---

$eleTag	unique element object tag
$iNode $jNode	end nodes
$A	cross-sectional area of element
$E	Young's Modulus
$G	Shear Modulus
$J	torsional moment of inertia of cross section
$Iz	second moment of area about the local z-axis
$Iy	second moment of area about the local y-axis
$transfTag	identifier for previously-defined coordinate-transformation (CrdTransf) object

NOTE:

The valid queries to an elastic beam-column element when creating an ElementRecorder object are 'force.'

EXAMPLE:

element elasticBeamColumn 1 2 4 5.5 100.0 1e6 9; # elastic element tag 1 between nodes 2 and 4 with area 5.5, E 100 and IZ 1e6 which uses transformation 9

- ---

Code Developed by: fmk