MinMax Material

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a MinMax material object. This stress-strain behaviour for this material is provided by another material. If however the strain ever falls below or above certain threshold values, the other material is assumed to have failed. From that point on, values of 0.0 are returned for the tangent and stress.

uniaxialMaterial MinMax $matTag $otherTag <-min $minStrain> <-max $maxSTrain>

---

$matTag	integer tag identifying material
$otherTag	tag of the other material
$minStrain	minimum value of strain. optional default = -1.0e16.
$$maxStrain	max value of strain. optional default = 1.0e16.

---

Code Developed by: Micheal Scott, Oregon State.