Pulse TimeSeries
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a TimeSeries object in which the load factor is some pulse function of the time in the domain.
| timeSeries Pulse $tStart $tEnd $period <-width $pulseWidth> <-shift $shift> <-factor $cFactor> |
| $tag | unique tag among TimeSeries objects |
| $tStart | starting time of non-zero load factor |
| $tEnd | ending time of non-zero load factor |
| $period | characteristic period of pulse |
| $pulseWidth | pulse width as a fraction of the period (optional, default = 0.5) |
| $shift | phase shift in seconds (optional, default = 0.0) |
| $cFactor | the load amplification factor (optional, default = 1.0) |
Code Developed by: Andreas Schellenberg, University of California, Berkeley.