ElasticTubularJoint Element

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct an ElasticTubularJoint element object, which models joint flexibility of tubular joints in two dimensional analysis of any structure having tubular joints.

element ElasticTubularJoint $Tag $iNode $jNode $Brace_Diameter $Brace_Angle $E $Chord_Diameter $Chord_Thickness $Chord_Angle

---

$Tag	unique element object tag
$iNode	first end node- it is always located on the chord axis
$jNode	second end node - it is always located on the chord wall
$Brace_Diameter	outer diameter of brace
$Brace_Angle	angle between brace and chord axis 0 < Brace_Angle < 90
$E	Young's Modulus
$ Chord_Diameter	outer diameter of chord
$Chord_Thickness	thickness of chord
$Chord_Angle	angle between chord axis and global x-axis 0 < Chord_Angle < 90

EXAMPLE:

element ElasticTubularJoint 1 1 2 0.25 45 210E+09 0.5 0.016 45 # Tubular joint having tag 1 which interconnects nodes 1 and 2; brace diameter is 25cm; intersection angle is 45 degrees; Young's modulus of the material used is 210e9; outer diameter and thickness of the chord are 50 cm and 1.6 cm respectively; angle between chord axis and global horizontal axis is 45 degrees.

---

Code Developed by: M. Kia and P. Alanjari, Sharif University of Technology and K. N. Toosi University of Technology, Tehran, Iran.