BuildingTcl -- addAnalysisModel

Commands

addAnalysisModelData AnalysisModelLabel $AnalysisModelLabel

addAnalysisModelData AnalysisTypeLabel $AnalysisTypeLabel

addAnalysisModelData $RequiredArgument1Label $RequiredArgument1Value

addAnalysisModelData $RequiredArgument2Label $RequiredArgument2Value

…

<addAnalysisModelData $InputArgument1Label $InputArgument1Value>

<addAnalysisModelData $InputArgument2Label $InputArgument2Value>

…

addAnalysisModel

Different AnalysisTypes have different input arguments:

• BuildingTcl -- addAnalysisModel: AnalysisTypeLabel LoadControl
• BuildingTcl -- addAnalysisModel: AnalysisTypeLabel DisplacementHistory
• BuildingTcl -- addAnalysisModel: AnalysisTypeLabel TimeHistory

Arguments

$AnalysisModelLabel

Unique Analysis Label for reference

$AnalysisTypeLabel

Specifies which AnalysisType is being used.

$RequiredArgument1Label $RequiredArgument1Value ...

Labels and corresponding values for AnalysisType-specific required argument.

$InputArgument1Label $InputArgument1Value …

Labels and corresponding values for AnalysisType-specific Input Arguments (Optional)

Notes

1. The addAnalysisModel command must be placed at the end of each Analysis-data definition, as it takes all data defined since the last addAnalysisModel command and define the Analysis.
2. The addAnalysisModel command is optional because the default AnalysisModels available are sufficient.

Default AnalysisModels

BuildingTcl comes with a set of pre-loaded Default AnalysisModels. This library of AnalysisModels should be sufficient in defining a model.

The following AnalysisModels are available:

DefaultDisplacementHistory

AnalysisModelType: DisplacementHistory

DefaultTimeHistory

AnalysisModelType: TimeHistory

DefaultLoadControl

AnalysisModelType: LoadControl

Examples

• BuildingTcl -- addAnalysisModel Examples -- Gravity Analyses
• BuildingTcl -- addAnalysisModel Examples -- Static Displacement-Controlled Pushover Analyses
• BuildingTcl -- addAnalysisModel Examples -- Dynamic Time-History Analyses

---

BuildingTcl -- addLoad

Return to BuildingTcl Command Language Manual