MultiLinear Material

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a uniaxial multilinear material object.

uniaxialMaterial MultiLinear $matTag $u1 $f1 $u2 $f2 $u3 $f3 $u4 $f4 ...

---

$matTag	integer tag identifying material
$u1 $f1	strain and stress (or deformation & force) at first point of the envelope
$u2 $f2	strain and stress (or deformation & force) at second point of the envelope
$u3 $f3	strain and stress (or deformation & force) at third point of the envelope
$u4 $f4	strain and stress (or deformation & force) at fourth point of the envelope

MultiLinear Material -- Hysteretic Behavior

---

NOTE: Muximum number of points on the envelope is 10.

---

Code Developed by: Frank Mckenna, UC Berkeley

Images Developed by: Vesna Terzic