Getting Started with BuildingTcl

From OpenSeesWiki
Revision as of 20:36, 27 October 2009 by Silviamazzoni (talk | contribs)
Jump to navigation Jump to search

BuildingTcl Commands

Most BuildingTcl Library commands consists of a series of parameter-defining add-Data commands, concluded by an add-Object command, which takes the previously defined parameters and assembles them into an individual library object.

  • SET UP

source myBuildingTcl.tcl

<setDataDir Data>

<setUnits -Length $BasicLengthUnit -Force $BasicForceUnit -Time BasicTimeUnit>

  • DEFINE INPUT DATA

addMaterialData …..

addMaterial ; # define Materials Library


addSectionData …..

addSection; # define Section Library


addElementModelData …..

addElementModel; # define ElementModel Library


addAnalysisModelData …..

addAnalysisModel; # define AnalysisModel Library


addModelData …..

addModel; # define Model (Elevation, Plan, 3DModel) Library

addLoadData ….. addLoad; # define Loads Library


addLoadCombinationData …..

addLoadCombination; # define LoadCombination Library

The following commands are Building-Tcl specific. They are used to run the OpenSees simulation.

  • BUILD AND ANALYZE

SelectModel …..

SelectLoadCombination …..

BuildAndAnalyze

Retrieved from "https://opensees.ist.berkeley.edu/wiki/index.php?title=Getting_Started_with_BuildingTcl&oldid=323"