Elastic Timoshenko Beam Column Element

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct an ElasticTimoshenkoBeam element object. A Timoshenko beam is a frame member that accounts for shear deformations. The arguments for the construction of an elastic Timoshenko beam element depend on the dimension of the problem, ndm:

For a two-dimensional problem:

element ElasticTimoshenkoBeam $eleTag $iNode $jNode $E $G $A $Iz $Avy $transfTag

For a three-dimensional problem:

element ElasticTimoshenkoBeam $eleTag $iNode $jNode $E $G $A $Jx $Iy $Iz $Avy $Avz $transfTag

---

$eleTag	unique element object tag
$iNode $jNode	end nodes
$E	Young's Modulus
$G	Shear Modulus
$A	cross-sectional area of element
$Jx	torsional moment of inertia of cross section
$Iy	second moment of area about the local y-axis
$Iz	second moment of area about the local z-axis
$Avy	Shear area for the local y-axis
$Avz	Shear area for the local z-axis
$transfTag	identifier for previously-defined coordinate-transformation (CrdTransf) object

NOTES:

The valid queries to an elastic Timoshenko beam element when creating an ElementRecorder object are 'force'.

For solid rectangular sections, shear area is often assumed to be 5/6 of the gross area. For I-shapes, the shear area can be approximated as Aweb.

EXAMPLE:

element ElasticTimoshenkoBeam 1 2 4 100.0 45.0 6.0 4.5 5.0 9; # elastic Timoshenko element with tag 1 between nodes 2 and 4 with E=100, G=45, A=6.0, I=4.5 and Av=5.0 which uses transformation 9

---

Code Developed by: Andreas Schellenberg