DoddRestrepo
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a Dodd-Restrepo steel material
| uniaxialMaterial Dodd_Restrepo $tag $Fy $Fsu $ESH $ESU $Youngs $ESHI $FSHI <$OmegaFac> |
| $matTag | integer tag identifying material |
| $Fy | Yield strength |
| $Fsu | Stress at peak load |
| $ESH | Strain at initiation of strain hardening |
| $ESU | Strain at peak Load |
| $Youngs | Modulus of elasticity |
| $ESHI | Strain for a point on strain hardening curve |
| $FSHI | Stress at point on strain hardening curve corresponding to ESHI |
| $OmegaFac | Optional: Defauult = 1.0. |
Examples:
References:
Code Developed by : L.L. Dodd & J. Restrepo