Excavation Supported by Cantilevered Sheet Pile Wall

Example prepared by: Christopher McGann and Pedro Arduino, University of Washington

---

Return to OpenSees User Page

This article describes the simulation of an excavation supported by a cantilevered sheet pile wall using OpenSees. The model considers plane strain conditions in two-dimensions, using quadrilateral elements with a pressure dependent constitutive model to simulate cohesionless soil, and beam-column elements to simulate a unit width of sheet pile wall. Beam-solid contact elements are used to model a frictional interface between the linear beam elements and the quadrilateral soil elements.

The input file used for this example is available to view and/or download here.

• excavation.tcl

Model Description

Fig. 1: Undeformed FE mesh for the excavation model.

Fig. 2: Deformed FE mesh after completion of excavation.

Material and Element Definitions

Soil-Wall Interface

Fig. 3: Contact forces after completion of initial state analysis.

Fig. 4: Contact forces in final excavated configuration.

Representative Results

File:.png

Fig. 5:

File:.png

Fig. 6:

File:.png

Fig. 7:

Return to OpenSees User Page