EqualDOF command

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a multi-point constraint between nodes.

equalDOF $rNodeTag $cNodeTag $dof1 $dof2 ...

---

$rNodeTag	integer tag identifying the retained, or master node (rNode)
$cNodeTag	integer tag identifying the constrained, or slave node (cNode)
$dof1 $dof2 ...	nodal degrees-of-freedom that are constrained at the cNode to be the same as those at the rNode
	Valid range is from 1 through ndf, the number of nodal degrees-of-freedom.

EXAMPLE:

equalDOF 2 3 1 3 5;

1. impose the displacenebts at dof's 1,3 and 5 of node 3 to be the same as those of node 2.

REFERENCE:

Cook R.D., Malkus D.S., and Plesha M. E. (1989). "Concepts and Applications of Finite Element Analysis". John Wiley & Sons, New York.

Code Developed by: fmk