Hysteretic Material

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a uniaxial bilinear hysteretic material object with pinching of force and deformation, damage due to ductility and energy, and degraded unloading stiffness based on ductility.

uniaxialMaterial Hysteretic $matTag $s1p $e1p $s2p $e2p <$s3p $e3p> $s1n $e1n $s2n $e2n <$s3n $e3n> $pinchX $pinchY $damage1 $damage2 <$beta>

---

$matTag	integer tag identifying material
$s1p $e1p	stress and strain (or force & deformation) at first point of the envelope in the positive direction
$s2p $e2p	stress and strain (or force & deformation) at second point of the envelope in the positive direction
$s3p $e3p	stress and strain (or force & deformation) at third point of the envelope in the positive direction (optional)
$s1n $e1n	stress and strain (or force & deformation) at first point of the envelope in the negative direction
$s2n $e2n	stress and strain (or force & deformation) at second point of the envelope in the negative direction
$s3n $e3n	stress and strain (or force & deformation) at third point of the envelope in the negative direction (optional)
$pinchx	pinching factor for strain (or deformation) during reloading
$pinchy	pinching factor for stress (or force) during reloading
$damage1	damage due to ductility: D1(mu-1)
$damage2	damage due to energy: D2(Eii/Eult)
$beta	power used to determine the degraded unloading stiffness based on ductility, mu-beta (optional, default=0.0)

---

Code Developed by: Micheal Scott & Filip Filippou, UC Berkeley

Images Developed by: Silvia Mazzoni