DoddRestrepo: Difference between revisions
Jump to navigation
Jump to search
Mschoettler (talk | contribs) No edit summary |
Mschoettler (talk | contribs) No edit summary |
||
| Line 14: | Line 14: | ||
| '''$Fy ''' || Yield strength | | '''$Fy ''' || Yield strength | ||
|- | |- | ||
| '''$Fsu ''' || | | '''$Fsu ''' || Ultimate tensile strength (UTS) | ||
|- | |- | ||
| '''$ESH ''' || Strain at initiation of strain hardening | | '''$ESH ''' || Strain at initiation of strain hardening | ||
|- | |- | ||
| '''$ESU''' || | | '''$ESU''' || Tensile strain at the UTS | ||
|- | |- | ||
| '''$Youngs ''' || Modulus of elasticity | | '''$Youngs ''' || Modulus of elasticity | ||
|- | |- | ||
| '''$ESHI ''' || Strain for a point on strain hardening curve | | '''$ESHI ''' || Strain for a point on strain hardening curve, recommended range of values for ESHI: [ (ESU + 5*ESH)/6, (ESU + 3*ESH)/4] | ||
|- | |- | ||
| '''$FSHI''' || Stress at point on strain hardening curve corresponding to ESHI | | '''$FSHI''' || Stress at point on strain hardening curve corresponding to ESHI | ||
|- | |- | ||
| '''$OmegaFac''' || | | '''$OmegaFac''' || Bauschinger curve roundness factor. Range: [0.75, 1.15]. Largest value tends to near bilinear Bauschinger curve. Default = 1.0. | ||
|- | |- | ||
|} | |} | ||
Revision as of 01:00, 6 November 2011
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a Dodd-Restrepo steel material
| uniaxialMaterial Dodd_Restrepo $tag $Fy $Fsu $ESH $ESU $Youngs $ESHI $FSHI <$OmegaFac> |
| $matTag | Integer tag identifying material |
| $Fy | Yield strength |
| $Fsu | Ultimate tensile strength (UTS) |
| $ESH | Strain at initiation of strain hardening |
| $ESU | Tensile strain at the UTS |
| $Youngs | Modulus of elasticity |
| $ESHI | Strain for a point on strain hardening curve, recommended range of values for ESHI: [ (ESU + 5*ESH)/6, (ESU + 3*ESH)/4] |
| $FSHI | Stress at point on strain hardening curve corresponding to ESHI |
| $OmegaFac | Bauschinger curve roundness factor. Range: [0.75, 1.15]. Largest value tends to near bilinear Bauschinger curve. Default = 1.0. |
Examples:
References:
Code Developed by : L.L. Dodd & J. Restrepo