Moment Curvature Example

This next example covers the moment-curvature analysis of a rectangular reinforced concrete section. In this example a Zero Length element with the fiber discretization of the cross section is used. In addition to providing understanding as to the creation of a fiber section, the example introduces Tcl language features such as variable and command substitution, expression evaluation and the use of procedures.

Here is the file: MomentCurvature.tcl

NOTE:

1. The lines in the dashed boxes are lines that appear in the input file.
2. all lines that begin with # are comments, they are ignored by the program (interpreter) but are useful for documenting the code. When creating your own input scripts you are highly encouraged to use comments.

Tcl Basics

In the tcl script that is to be presented, variables, expressions and procedures are used.

A variable is a symbolic name given to some known or unknown quantity or information, for the purpose of allowing the name to be used independently of the information it represents. In Tcl a variable once set (with the set command) can then be subsequently using the syntax of $variable. The following tcl example sets the variable v to be 2.0, and then prints to the screen a message saying what the value of v is.

set v 3.0
puts "v equals $v"

Expressions can be evaluated using the expr command. When using the expr command, most mathematical functions found in any programming language can be used, e.g. sin(), cos(), max(), min(), abs(),... It is also typical to combine an expression command, with a set command. To do this, the expr command is enclosed in square brackets []'s. The following example demonstrates the setting of a variable v to be 3.0, the setting of another variable sum to be the result of adding whatever the value of the variable v is to 2.0, and finally the printing to the screen of a message saying what the current value of sum is.

Typically, the result of an expression is then set to another variable. A simple example to add 2.0 to a parameter and print the result is shown below:

set v 3.0
set sum [expr $v + 2.0]
puts "sum equals $sum"; # print the sum

Section

For the zero length element, a section discretized by concrete and steel is created to represent the behaviour. UniaxialMaterial objects are created which define the fiber stress-strain relationship's. There is confined concrete in the core, unconfined concrete in the cover region, and reinforcing steel.

The dimension of the section are as shown in the figure. The section depth is 24 inches, the width 15 inches, and there is 1.5inch cover all around. Strong axis bending is about the z-axis. The section is separated into confined and unconfined concrete regions, for which separate discretizations will be generated, Reinforcing steel is placed around the boundary of th confined and unconfined regions. The fiber discretization is shown below:

The following are the commands that generate the section and perform the moment curvature analysis. The model and analysis commands are contained in the MomentCurvature procedure. These are contained in a seperate file which are "sourced"" by the main script.

# units: kip, in

# Remove existing model
wipe

# Create ModelBuilder (with two-dimensions and 3 DOF/node)
model BasicBuilder -ndm 2 -ndf 3

# Define materials for nonlinear columns
# ------------------------------------------
# CONCRETE                  tag   f'c        ec0   f'cu   ecu
# Core concrete (confined)
uniaxialMaterial Concrete01  1  -6.0  -0.004   -5.0     -0.014

# Cover concrete (unconfined)
uniaxialMaterial Concrete01  2  -5.0   -0.002   0.0     -0.006

# STEEL
# Reinforcing steel 
set fy 60.0;      # Yield stress
set E 30000.0;    # Young's modulus
#                        tag  fy E0    b
uniaxialMaterial Steel01  3  $fy $E 0.01

# ------------------------------------------

# set some paramaters
set colWidth 15
set colDepth 24 

set cover  1.5
set As    0.60;     # area of no. 7 bars

# some variables derived from the parameters
set y1 [expr $colDepth/2.0]
set z1 [expr $colWidth/2.0]
# Define cross-section for nonlinear columns

section Fiber 1 {

    # Create the concrete core fibers
    patch rect 1 10 1 [expr $cover-$y1] [expr $cover-$z1] [expr $y1-$cover] [expr $z1-$cover]

    # Create the concrete cover fibers (top, bottom, left, right)
    patch rect 2 10 1  [expr -$y1] [expr $z1-$cover] $y1 $z1
    patch rect 2 10 1  [expr -$y1] [expr -$z1] $y1 [expr $cover-$z1]
    patch rect 2  2 1  [expr -$y1] [expr $cover-$z1] [expr $cover-$y1] [expr $z1-$cover]
    patch rect 2  2 1  [expr $y1-$cover] [expr $cover-$z1] $y1 [expr $z1-$cover]

    # Create the reinforcing fibers (left, middle, right)
    layer straight 3 3 $As [expr $y1-$cover] [expr $z1-$cover] [expr $y1-$cover] [expr $cover-$z1]
    layer straight 3 2 $As 0.0 [expr $z1-$cover] 0.0 [expr $cover-$z1]
    layer straight 3 3 $As [expr $cover-$y1] [expr $z1-$cover] [expr $cover-$y1] [expr $cover-$z1]

}    

# Estimate yield curvature
# (Assuming no axial load and only top and bottom steel)
set d [expr $colDepth-$cover]	;# d -- from cover to rebar
set epsy [expr $fy/$E]	;# steel yield strain
set Ky [expr $epsy/(0.7*$d)]

# Print estimate to standard output
puts "Estimated yield curvature: $Ky"

# Set axial load 
set P -180

set mu 15;		# Target ductility for analysis
set numIncr 100;	# Number of analysis increments

# Call the section analysis procedure
source MomentCurvature.tcl
MomentCurvature 1 $P [expr $Ky*$mu] $numIncr

Moment Curvature Procedure

The Tcl procedure to perform the moment-curvature analysis follows. The proceudure first creates the model which consists of two nodes and a ZeroLengthSection element. A depiction of the geometry is as shown in the figure above. The image on the left shows an edge view of the element, with local z-axis coming out of the page. Node 1 is completely restrained, with the applied loads acting at Node 2. A compressive axial load, P, of 180kips is applied to the section during the moment curvature analysis. The model is contained within the procedure MomentCurvature.

After the model has been created, the analysis is performed. A single load step is first performed for the axial load, then the integrator is changed to DisplacementControl to impose nodal displacements, which map directly to section deformations. A reference moment of 1.0 is defined in a Linear time series. For this reference moment, the DisplacementControl integrator will determine the load factor needed to apply the imposed displacement. A node recorder is defined to track the momentcurvature results. The load factor is the moment, and the nodal rotation is in fact the curvature of the element with zero thickness.

proc MomentCurvature {secTag axialLoad maxK {numIncr 100} } {
	# Define two nodes at (0,0)
	node 1 0.0 0.0
	node 2 0.0 0.0

	# Fix all degrees of freedom except axial and bending
	fix 1 1 1 1
	fix 2 0 1 0

	# Define element
	#                         tag ndI ndJ  secTag
	element zeroLengthSection  1   1   2  $secTag

	# Create recorder
	recorder Node -file section$secTag.out -time -node 2 -dof 3 disp

	# Define constant axial load
	pattern Plain 1 "Constant" {
		load 2 $axialLoad 0.0 0.0
	}

	# Define analysis parameters
	integrator LoadControl 0.0
	system SparseGeneral -piv;	# Overkill, but may need the pivoting!
	test NormUnbalance 1.0e-9 10
	numberer Plain
	constraints Plain
	algorithm Newton
	analysis Static

	# Do one analysis for constant axial load
	analyze 1

	# Define reference moment
	pattern Plain 2 "Linear" {
		load 2 0.0 0.0 1.0
	}

	# Compute curvature increment
	set dK [expr $maxK/$numIncr]

	# Use displacement control at node 2 for section analysis
	integrator DisplacementControl 2 3 $dK 1 $dK $dK

	# Do the section analysis
	analyze $numIncr
}

Results

When you run this script, you should see the following printed to the screen:

In addition, your directory should contain the following 3 files with the data shown: