OpenSees Example 1a. 2D Elastic Cantilever Column: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 31: | Line 31: | ||
<strong>Files</strong> | <strong>Files</strong> | ||
*[[Media:Ex1a.Canti2D.EQ.tcl|Ex1a.Canti2D.EQ.tcl]] | *[[Media:Ex1a.Canti2D.EQ.tcl|Ex1a.Canti2D.EQ.tcl]] | ||
*[[Media:BM68elc. | *[[Media:BM68elc.zip|BM68elc.acc]] (ground-motion file) | ||
</div> | </div> | ||
|} | |} | ||
Latest revision as of 23:28, 1 September 2010
Introduction
Example 1a is a simple model of an elastic cantilever column. The objective of this example is to give an overview of input format.
While the structural model is the same, there are two lateral-load cases:
Input
Static Pushover |
Dynamic EQ Ground Motion |
Run
- To run Static Pushover analysis:
source Ex1a.Canti2D.Push.tcl
- To run EQ ground-motion analysis (BM68elc.acc needs to be downloaded into the same directory):
source Ex1a.Canti2D.EQ.tcl
Notes
Return to OpenSees Examples Manual -- Structural Models & Analyses
Return to OpenSees User