Rayleigh Damping Command: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 28: | Line 28: | ||
NOTE: | NOTE: | ||
#The command overwrites any existing damping coeeficients at the Elements and Nodes. | #The command overwrites any existing damping coeeficients at the Elements and Nodes. | ||
# The following paper is something that you should read if you are new to the damping and nonlinear analysis. Finley A. Charney, "Unintended Consequences of Modeling Damping in Structures", J. Struct. Engrg. Volume 134, Issue 4, pp. 581-592 (April 2008) | # The following paper is something that you should read if you are new to the damping and nonlinear analysis. Finley A. Charney, "Unintended Consequences of Modeling Damping in Structures", J. Struct. Engrg. Volume 134, Issue 4, pp. 581-592 (April 2008) [http://dx.doi.org/10.1061/(ASCE)0733-9445(2008)134:4(581) DOI] | ||
EXAMPLE: | EXAMPLE: | ||
Revision as of 00:16, 22 May 2010
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to assign damping to all previously-defined elements and nodes. When using rayleigh damping in OpenSees, the damping matrix for an element or node, D is specified as a combination of stiffness and mass-proportional damping matrices:
D = $alphaM * M + $betaK * Kcurrent +$betaKinit * Kinit + $betaKcomm * KlastCommit
| rayleigh $alphaM $betaK $betaKinit $betaKcomm |
| $nodeTag | integer tag identifying node |
| $alphaM | factor applied to elements or nodes mass matrix |
| $betaK | factor applied to elements current stiffness matrix. |
| $betaKinit | factor applied to elements initial stiffness matrix. |
| $betaKcomm | factor applied to elements committed stiffness matrix. |
NOTE:
- The command overwrites any existing damping coeeficients at the Elements and Nodes.
- The following paper is something that you should read if you are new to the damping and nonlinear analysis. Finley A. Charney, "Unintended Consequences of Modeling Damping in Structures", J. Struct. Engrg. Volume 134, Issue 4, pp. 581-592 (April 2008) DOI
EXAMPLE:
rayleigh 0.01 0.02 0.0 0.0
Code Developed by: fmk