Quad Element: Difference between revisions

Revision as of 21:45, 25 March 2010

This command is used to construct a FourNodeQuad element object which uses a bilinear isoparametric formulation.

element quad $eleTag $iNode $jNode $kNode $lNode $thick $type $matTag <$pressure $rho $b1 $b2>

$eleTag	unique element object tag
$iNode $jNode $kNode $lNode	four nodes defining element boundaries, input in counter-clockwise order around the element.
$thick	element thickness
$type	string representing material behavior. The type parameter can be either "PlaneStrain" or "PlaneStress."
$matTag	tag of nDMaterial
$pressure	surface pressure (optional, default = 0.0)
$rho	element mass density (per unit volume) from which a lumped element mass matrix is computed (optional, default=0.0)
$b1 z$b2	constant body forces defined in the isoparametric domain (optional, default=0.0)

NOTE:

Consistent nodal loads are computed from the pressure and body forces.
The valid queries to a Quad element when creating an ElementRecorder object are 'forces', 'stresses,' and 'material $matNum matArg1 matArg2 ...' Where $matNum refers to the material object at the integration point corresponding to the node numbers in the isoparametric domain.

EXAMPLE:

Code Developed by: Micheal Scott, Oregon State

@@ Line 6: / Line 6: @@
 | style="background:yellow; color:black; width:800px" | '''element quad $eleTag $iNode $jNode $kNode $lNode $thick $type $matTag <$pressure $rho $b1 $b2>'''
 |}
 ----