Model command: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 30: | Line 30: | ||
[[Example3.1.tcl]] | [[Example3.1.tcl]] | ||
---- | |||
Code Developed by: <span style="color:blue"> fmk </span> | Code Developed by: <span style="color:blue"> fmk </span> | ||
Revision as of 22:26, 24 February 2010
This command is used to define spatial dimension of model and number of degrees-of-freedom at nodes. Once issued additional commands are added to interpreter.
| model BasicBuilder -ndm $ndm <-ndf $ndf> |
| $ndm | spatial dimension of problem (1,2, or 3) |
| $ndf | number of degrees of freedom at node (optional) |
| default value depends on value of ndm: | |
| ndm=1 -> ndf=1 | |
| ndm=2 -> ndf=3 | |
| ndm=3 -> ndf=6 |
These additional commands allow for the construction of Nodes, Masses, Materials (nDMaterial Command, uniaxialMaterial Command), Sections, Elements, LoadPatterns, TimeSeries, Transformations, Blocks and Constraints. These additional commands are described in the subsequent chapters.
EXAMPLE:
model basic -ndm 2 -ndf 3; # 2 spacial dimensions, 3 DOF's per node
Code Developed by: fmk