CFSSSWP: Difference between revisions
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
|} | |} | ||
$tag Integer identifier used to tag the material model | |||
$height SWP’s height (mm) | |||
$width SWP’s width (mm) | |||
$fuf Tensile strength of framing members (MPa) | |||
$fyf Yield strength of framing members (MPa) | |||
$tf Framing thickness (mm) | |||
$Af Framing cross section area (mm²) | |||
$fus Tensile strength of steel sheet sheathing (MPa) | |||
$fys Yield strength of steel sheet sheathing (MPa) | |||
$ts Sheathing thickness (mm) | |||
$np Sheathing number (one or two sides sheathed) | |||
$ds Screws diameter (mm) | |||
$Vs Screws shear strength (N) | |||
$sc Screw spacing on the sheathing perimeter (mm) | |||
$dt Anchor bolt’s diameter (mm) | |||
$openingArea Total area of openings (mm²) | |||
$openingLength Cumulative length of openings (mm) | |||
---- | ---- | ||
Revision as of 01:47, 27 January 2015
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a uniaxialMaterial model that simulates the hysteresis response (Shear strength-lateral Displacement) of a steel sheathed Cold-Formed Steel Shear Wall Panel. The hysteresis model has smooth curves and takes into account the strength and stiffness degradation, as well as pinching effect.
| uniaxialMaterial CFSSSWP $tag $height $width $fuf $fyf $tf $Af $fus $fys $ts $np $ds $Vs $sc $dt $openingArea $openingLength |
$tag Integer identifier used to tag the material model
$height SWP’s height (mm)
$width SWP’s width (mm)
$fuf Tensile strength of framing members (MPa)
$fyf Yield strength of framing members (MPa)
$tf Framing thickness (mm)
$Af Framing cross section area (mm²)
$fus Tensile strength of steel sheet sheathing (MPa)
$fys Yield strength of steel sheet sheathing (MPa)
$ts Sheathing thickness (mm)
$np Sheathing number (one or two sides sheathed)
$ds Screws diameter (mm)
$Vs Screws shear strength (N)
$sc Screw spacing on the sheathing perimeter (mm)
$dt Anchor bolt’s diameter (mm)
$openingArea Total area of openings (mm²)
$openingLength Cumulative length of openings (mm)