PinchingLimitStateMaterial Example

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

The following are sample scripts for using the Pinching Limit State Material and associated limit surface (RotationLimitCurve) to simulate the behavior of a shear-critical reinforced concrete column tested by Sezen and Moehle (2006) (Specimen 1).

The scripts below are for a material model and limit surface that are applied to zero-length shear springs in series with fiber-section column elements (see references below fro more detail).

Mode 1: Direct Parameter Input

limitCurve RotationShearCurve 1 3 1 3 3 -1 -1 -10.0 0.0175

uniaxialMaterial PinchingLimitStateMaterial 9 6 2 1 3057.9 2 1 0.3 0.2 0.0 0.3 0.2 0.0 0.0 1.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.3

File:PinchingLimitState Sp1-f.png

Mode 2: Calibrated Model Input

limitCurve RotationShearCurve 1 3 1 3 3 -1 -1 0 1 16.0 13.625 16.0 115.75 6.0 6.28 169.0 43.0 1.0 0.00393 -3.177 65.5 66.6 0.0

uniaxialMaterial PinchingLimitStateMaterial 9 6 2 1 -3 2 2 1 16.0 13.625 16.0 57.88 6.0 6.28 169.0 43.0 1.0 0.00393 -3.177 65.5 66.6

---

REFERENCES:

1. LeBorgne M. R., 2012, "Modeling the Post Shear Failure Behavior of Reinforced Concrete Columns." Austin, Texas: University of Texas at Austin, PhD, 301.

2. LeBorgne M. R. , Ghannoum W. M., 2013, "Analytical Element for Simulating Lateral-Strength Degradation in Reinforced Concrete Columns and Other Frame Members," Journal of Structural Engineering, doi: 10.1061/(ASCE)ST.1943-541X.0000925

3. Ghannoum W. M., Moehle J. P., 2012, "Rotation-Based Shear Failure Model for Lightly Confined Reinforced Concrete Columns," Journal of Structural Engineering, V. 138, No. 10, 1267-78

4. Sezen Halil, Moehle Jack P., 2006, "Seismic Tests of Concrete Columns with Light Transverse Reinforcement," ACI Structural Journal, V. 103, No. 6, 842-9.