RambergOsgoodSteel Material: Difference between revisions
Jump to navigation
Jump to search
Rezarahimi (talk | contribs) No edit summary |
Rezarahimi (talk | contribs) No edit summary |
||
| Line 27: | Line 27: | ||
'''Introduction to the Ramberg–Osgood’s Material Model:''' | '''Introduction to the Ramberg–Osgood’s Material Model:''' | ||
In earthquake engineering, Ramberg–Osgood functions are often used to model the behavior of structural steel materials and components. These functions are obtained when the power is normalized to an arbitrary strain, ε0, for which the plastic component of the strain, εplastic, is not zero. Generally the yield strain, εy, provides a good choice for normalization of strain, the Ramberg–Osgood function is expressed as: | In earthquake engineering, Ramberg–Osgood functions are often used to model the behavior of structural steel materials and components. These functions are obtained when the power is normalized to an arbitrary strain, ε0, for which the plastic component of the strain, εplastic, is not zero. Generally the yield strain, εy, provides a good choice for normalization of strain, the Ramberg–Osgood function is expressed as: | ||
Revision as of 05:59, 18 July 2013
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a Ramberg–Osgood steel material object.
| uniaxialMaterial RambergOsgoodSteel $matTag $fy $Es $a $n |
| $matTag | integer tag identifying material |
| $fy | yield strength |
| $E0 | initial elastic tangent |
| $a | “yield offset” and the Commonly used value for $a is 0.002 |
| $n | Parameters to control the transition from elastic to plastic branches. And controls the hardening of the material by increasing the "n" hardening ratio will be decreased.
|
Introduction to the Ramberg–Osgood’s Material Model:
In earthquake engineering, Ramberg–Osgood functions are often used to model the behavior of structural steel materials and components. These functions are obtained when the power is normalized to an arbitrary strain, ε0, for which the plastic component of the strain, εplastic, is not zero. Generally the yield strain, εy, provides a good choice for normalization of strain, the Ramberg–Osgood function is expressed as: