RC Section: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 39: | Line 39: | ||
For more general reinforced concrete section definitions, use the [[Fiber Section]] command. | |||
---- | ---- | ||
Code Developed by: <span style="color:blue"> Michael H. Scott, Oregon State University </span> | Code Developed by: <span style="color:blue"> Michael H. Scott, Oregon State University </span> | ||
Revision as of 22:20, 8 May 2013
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command allows the user to construct an RCSection2d object, which is an encapsulated fiber representation of a rectangular reinforced concrete section with core and confined regions of concrete and single top and bottom layers of reinforcement appropriate for plane frame analysis.
| section RCSection2d $secTag $coreTag $coverTag $steelTag $d $b $cover $Atop $Abot $Aside $Nfcore $Nfcover $Nfs |
| $secTag | unique section tag |
| $coreTag | tag of uniaxialMaterial assigned to each fiber in the core region |
| $coverTag | tag of uniaxialMaterial assigned to each fiber in the cover region |
| $steelTag | tag of uniaxialMaterial assigned to each reinforcing bar |
| $d | section depth |
| $b | section width |
| $cover | cover depth (assumed uniform around perimeter) |
| $Atop | area of reinforcing bars in top layer |
| $Abot | area of reinforcing bars in bottom layer |
| $Nfcore | number of fibers through the core depth |
| $Nfcover | number of fibers through the cover depth |
| $Nfs | number of reinforcing bars in each layer |
For more general reinforced concrete section definitions, use the Fiber Section command.
Code Developed by: Michael H. Scott, Oregon State University