Velocity and Pressure Dependent Friction: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 25: Line 25:
|}
|}


----


EXAMPLES:
EXAMPLES:
Line 30: Line 32:
frictionModel VelPressureDep 1 0.085 0.163 7.0686 0.05 0.08 0.77
frictionModel VelPressureDep 1 0.085 0.163 7.0686 0.05 0.08 0.77


----


REFERENCES:
REFERENCES:

Revision as of 22:09, 2 September 2012



This command is used to construct a VelPressureDep friction model object.

frictionModel VelPressureDep $frnTag $muSlow $muFast0 $A $deltaMu $alpha $transRate
$frnTag unique friction model object tag
$muSlow coefficient of friction at low velocity
$muFast0 initial coefficient of friction at high velocity
$A nominal contact area
$deltaMu pressure parameter calibrated from experimental data
$alpha pressure parameter calibrated from experimental data
$transRate transition rate from low to high velocity


EXAMPLES:

frictionModel VelPressureDep 1 0.085 0.163 7.0686 0.05 0.08 0.77


REFERENCES:

[1] Tsopelas P., and Constantinou M. C. (1996). "Experimental Study of FPS System in Bridge Seismic Isolation." Earthquake Eng. and Structural Dynamics, VOL. 25, 65-78.

[2] Constantinou M. C., Tsopelas P., Kasalanati A., and Wolff E. D. (1999). Property Modification Factors for Seismic Isolation Bearings. Technical Report MCEER-99-0012, University of Buffalo, Buffalo, New York.


Code Developed by: Andreas Schellenberg, University of California, Berkeley.

Retrieved from "https://opensees.ist.berkeley.edu/wiki/index.php?title=Velocity_and_Pressure_Dependent_Friction&oldid=10025"