Total Relative Norm Displacement Increment Test

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a convergence test which uses the relative of the solution vector of the matrix equation to determine if convergence has been reached. The RelativeTotalNormDispIncr object tests for convergence using the ratio of the current norm to the total norm (the sum of all the norms since last convergence) of the solution vector. What the solution vector of the matrix equation is, depends on the integrator and constraint handler chosen. Usually, though not always, it is equal to the displacement increments that are to be applied to the model. The command to create a RelativeTotalNormDispIncr test is the following:

test RelativeTotalNormDispIncr $tol $iter <$pFlag> <$nType>

$tol	the tolerance criteria used to check for convergence
$iter	the max number of iterations to check before returning failure condition
$pFlag	optional print flag, default is 0. valid options:
	0 print nothing
	1 print information on norms each time test() is invoked
	2 print information on norms and number of iterations at end of successful test
	4 at each step it will print the norms and also the <math>\Delta U</math> and <math>R(U)</math> vectors.
	5 if it fails to converge at end of $numIter it will print an error message BUT RETURN A SUCCESSFUL test
$nType	optional type of norm, default is 2. (0 = max-norm, 1 = 1-norm, 2 = 2-norm, ...)

---

NOTES:

1. When using the Lagrange Multipliers method additional unknowns, the Lagrange multipliers, exist in the solution vector, making convergence using this test usually impossible (even though the solution might have converged).

---

THEORY:

If the system of equations formed by the integrator is:

<math>K \Delta U^i = R(U^i)\,\!</math>

This convergence test is testing:

<math>\frac{\parallel \DeltaU^i \parallel}{\parallel \DeltaU^0 \parallel + ... + \parallel \DeltaU^i \parallel} < \text{tol} \!</math>

---

Code Developed by: Andreas Schellenberg, University of California, Berkeley.