Stress Density Material

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a multi-dimensional stress density material object for modeling sand behaviour following the work of Cubrinovski and Ishihara (1998a,b).

nDMaterial StressDensityModel $matTag $mDen $eNot $A $m $nu $a1 $b1 $a2 $b2 $a3 $b3 $fd $muNot $muCyc $sc $M $patm <$ssl1 $ssl2 $ssl3 $ssl4 $ssl5 $ssl6 $ssl7 $ssl8 $ssl9 $ssl10 $hsl $p1 $p2 $p3 $p4 $p5 $p6 $p7 $p8 $p9 $p10>

$matTag	integer tag identifying material
$mDen	mass density
$eNot	initial void ratio
$A	initial bulk modulus
$m	overconsolidation ratio
$nu	Poisson's ratio
$a1	peak stress ratio coefficient (etaMax = a1 + b1*Is)
$b1	peak stress ratio coefficient (etaMax = a1 + b1*Is)
$a2	max shear modulus coefficient (Gn_max = a2 + b2*Is)
$b2	max shear modulus coefficient (Gn_max = a2 + b2*Is)
$a3	min shear modulus coefficient (Gn_min = a3 + b3*Is)
$b3	min shear modulus coefficient (Gn_min = a3 + b3*Is)
$fd	degradation constant
$muNot	dilatancy coefficient (monotonic loading)
$muCyc	dilatancy coefficient (cyclic loading)
$sc	dilatancy strain
$M	critical state stress ratio
$patm	atmospheric pressure (in appropriate units)
<$ssl1>	void ratio of quasi steady state (QSS-line) at pressure $p1 (default = 0.877)
<$ssl2>	void ratio of quasi steady state (QSS-line) at pressure $p2 (default = 0.877)
<$ssl3>	void ratio of quasi steady state (QSS-line) at pressure $p3 (default = 0.873)
<$ssl4>	void ratio of quasi steady state (QSS-line) at pressure $p4 (default = 0.870)
<$ssl5>	void ratio of quasi steady state (QSS-line) at pressure $p5 (default = 0.860)
<$ssl6>	void ratio of quasi steady state (QSS-line) at pressure $p6 (default = 0.850)
<$ssl7>	void ratio of quasi steady state (QSS-line) at pressure $p7 (default = 0.833)
<$ssl8>	void ratio of quasi steady state (QSS-line) at pressure $p8 (default = 0.833)
<$ssl9>	void ratio of quasi steady state (QSS-line) at pressure $p9 (default = 0.833)
<$ssl10>	void ratio of quasi steady state (QSS-line) at pressure $p10 (default = 0.833)
<$hsl>	void ratio of upper reference state (UR-line) for all pressures
<$p1>	pressure corresponding to $ssl1 (default = 1.0 kPa)
<$p2>	pressure corresponding to $ssl1 (default = 10.0 kPa)
<$p3>	pressure corresponding to $ssl1 (default = 30.0 kPa)
<$p4>	pressure corresponding to $ssl1 (default = 50.0 kPa)
<$p5>	pressure corresponding to $ssl1 (default = 100.0 kPa)
<$p6>	pressure corresponding to $ssl1 (default = 200.0 kPa)
<$p7>	pressure corresponding to $ssl1 (default = 400.0 kPa)
<$p8>	pressure corresponding to $ssl1 (default = 400.0 kPa)
<$p9>	pressure corresponding to $ssl1 (default = 400.0 kPa)
<$p10>	pressure corresponding to $ssl1 (default = 400.0 kPa)

The material formulations for the StressDensity object are "ThreeDimensional" and "PlaneStrain"

---

Code Developed by Saumyashuchi Das, University of Canterbury. Maintained by Chris McGann

---

General Information

This nDMaterial object provides the