NDMaterial Command: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 29: | Line 29: | ||
*[[Plane Strain Material]] | *[[Plane Strain Material]] | ||
*[[MCP | Multi Axial Cyclic Plasticity]] | *[[MCP | Multi Axial Cyclic Plasticity]] | ||
*[[Bounding Surface Cam Clay Material]] | *[[Bounding Cam Clay | Bounding Surface Cam Clay Material]] | ||
*[[Plate Fiber Material]] | *[[Plate Fiber Material]] | ||
* [[Plane Stress Concrete Materials]] | * [[Plane Stress Concrete Materials]] | ||
Revision as of 05:01, 23 May 2016
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct an NDMaterial object which represents the stress-strain relationship at the gauss-point of a continuum element.
| nDMaterial matType? arg1? ... |
The type of material created and the additional arguments required depends on the matType? provided in the command.
NOTE:
The valid queries to any uniaxial material when creating an ElementRecorder are 'strain', and 'stress'. Some materials have additional queries to which they will respond. These are documented in the NOTES section for those materials.
The following contain information about matType? and the args required for each of the available material types:
- Elastic Isotropic Material
- Elastic Orthotropic Material
- J2 Plasticity Material
- Drucker Prager Material
- Concrete Damage Model
- Plane Stress Material
- Plane Strain Material
- Multi Axial Cyclic Plasticity
- Bounding Surface Cam Clay Material
- Plate Fiber Material
- Plane Stress Concrete Materials
- FSAM - 2D RC Panel Constitutive Behavior
- Tsinghua Sand Models
- Manzari Dafalias Material
- Materials for Modeling Concrete Walls
- Contact Materials for 2D and 3D
- Wrapper material for Initial State Analysis
- UC San Diego soil models (Linear/Nonlinear, dry/drained/undrained soil response under general 2D/3D static/cyclic loading conditions (please visit UCSD for examples)
- UC San Diego Saturated Undrained soil
- Misc.