EqualDOF command: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(Change terminology to retained/constrained) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 11: | Line 11: | ||
{| | {| | ||
| style="width:150px" | '''$rNodeTag ''' || integer tag identifying the retained | | style="width:150px" | '''$rNodeTag ''' || integer tag identifying the retained node (rNode) | ||
|- | |- | ||
| '''$cNodeTag ''' || integer tag identifying the constrained | | '''$cNodeTag ''' || integer tag identifying the constrained node (cNode) | ||
|- | |- | ||
| '''$dof1 $dof2 ...''' || nodal degrees-of-freedom that are constrained at the cNode to be the same as those at the rNode | | '''$dof1 $dof2 ...''' || nodal degrees-of-freedom that are constrained at the cNode to be the same as those at the rNode | ||
| Line 25: | Line 25: | ||
equalDOF 2 3 1 3 5; | equalDOF 2 3 1 3 5; | ||
# impose the | # impose the displacements at dof's 1,3 and 5 of node 3 to be the same as those of node 2. | ||
REFERENCE: | REFERENCE: | ||
Cook R.D., Malkus D.S., | Cook, R.D., Malkus, D.S., Plesha, M. E., and Witt, R. J., "Concepts and Applications of Finite Element Analysis," 4th edition, John Wiley and Sons publishers, 2002. | ||
Code Developed by: <span style="color:blue"> fmk </span> | Code Developed by: <span style="color:blue"> fmk </span> | ||
Latest revision as of 16:14, 13 June 2020
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a multi-point constraint between nodes.
| equalDOF $rNodeTag $cNodeTag $dof1 $dof2 ... |
| $rNodeTag | integer tag identifying the retained node (rNode) |
| $cNodeTag | integer tag identifying the constrained node (cNode) |
| $dof1 $dof2 ... | nodal degrees-of-freedom that are constrained at the cNode to be the same as those at the rNode |
| Valid range is from 1 through ndf, the number of nodal degrees-of-freedom. |
EXAMPLE:
equalDOF 2 3 1 3 5;
- impose the displacements at dof's 1,3 and 5 of node 3 to be the same as those of node 2.
REFERENCE:
Cook, R.D., Malkus, D.S., Plesha, M. E., and Witt, R. J., "Concepts and Applications of Finite Element Analysis," 4th edition, John Wiley and Sons publishers, 2002.
Code Developed by: fmk