LimitStateMaterialExampleDebugged

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

Application of a limit state material is demonstrated on an example of a column modeled with force-based beam-column element. Three types of analysis are performed on a same column:

• pushover analysis
• cyclic analysis
• time history analysis

Static analyses: pushover and cyclic

Main file to source to perform pushover analysis is:

• CenterCol_basicModel_Pushover.tcl

Main file to source to perform cyclic analysis is:

• CenterCol_basicModel_Cyclic.tcl

Supporting files to be stored in the same folder with the main file:

1. CenterColAxialSpring.tcl
2. CenterColShearSpring.tcl
3. CenterColSecFiber.tcl
4. tags.tcl

Time history analysis

Main file to source to perform time history analysis is:

• CenterCol_basicModel_Dynamic.tcl

Supporting files to be stored in the same folder with the main file:

1. CenterColAxialSpring.tcl
2. CenterColShearSpring.tcl
3. CenterColSecFiber.tcl
4. tags.tcl
5. Dynamic.EQ.Uniform_LimitState.tcl
6. LibAnalysisDynamicParameters_LimitState.tcl
7. ReadSMDFile.tcl
8. DisplayModel2D.tcl
9. DisplayPlane.tcl
10. TCU047-N.tcl

---

Original code debugged and extended to include time history analysis by: Mohammad Reza Azadi Kakavand, College of Engineering, University of Tehran, Iran