ConfinedConcrete01 Material: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(34 intermediate revisions by 2 users not shown)
Line 12: Line 12:
relationships,
 each 
of 
which
 corresponding
 to 
a 
different
 level 
of 
confinement.
 Currently,
 the
  
relationships,
 each 
of 
which
 corresponding
 to 
a 
different
 level 
of 
confinement.
 Currently,
 the
  
Attard
 and
 Setunge’s
 model
 is
 implemented
 in
 calculating
 each
 active
 curve
 of
 the
 confined
  
Attard
 and
 Setunge’s
 model
 is
 implemented
 in
 calculating
 each
 active
 curve
 of
 the
 confined
  
concrete.

concrete.
 IMPORTANT: the units to be used are MPa, mm.


{|  
{|  
Line 21: Line 21:


{|
{|
|  style="width:150px" | '''$tag ''' || integer tag identifying material
|  style="width:150px" | '''$tag ''' || integer tag identifying material.
|-
|-
|  '''$secType ''' || tag for the transverse reinforcement configuration. See NOTE 1.  
|  '''$secType ''' || tag for the transverse reinforcement configuration. See NOTE 1.  
Line 51: Line 51:
| '''$phiLon''' || diameter of longitudinal bars.
| '''$phiLon''' || diameter of longitudinal bars.
|-
|-
| '''<-internal $phisi $Si $fyhi $Es0i $haRatioi $mui>"'' || optional parameters for defining the internal transverse reinforcement. If they are not specified they will be assumed equal to the external ones (for S2, S3, S4a, S4b and S5 typed).
| '''<-internal $phisi $Si $fyhi $Es0i $haRatioi $mui>''' || optional parameters for defining the internal transverse reinforcement. If they are not specified they will be assumed equal to the external ones (for S2, S3, S4a, S4b and S5 typed).
|-
|-
| '''<-wrap $cover $Am $Sw $ful $Es0w>"'' || optional parameters required when section is strengthened with FRP wraps.
| '''<-wrap $cover $Am $Sw $ful $Es0w>''' || optional parameters required when section is strengthened with FRP wraps. See NOTE 5.
|}
|}


Line 60: Line 60:
1) The following section types are available:
1) The following section types are available:
{|
{|
| S1 || square section with S1 type of transverse reinforcement with or without external FRP wrapping;
| '''S1''' || square section with S1 type of transverse reinforcement with or without external FRP wrapping;
|-
|-
| S2 || square section with S2 type of transverse reinforcement with or without external FRP wrapping;
| '''S2''' || square section with S2 type of transverse reinforcement with or without external FRP wrapping;
|-
|-
| S3 || square section with S3 type of transverse reinforcement with or without external FRP wrapping;
| '''S3''' || square section with S3 type of transverse reinforcement with or without external FRP wrapping;
|-
|-
| S4a || square section with S4a type of transverse reinforcement with or without external FRP wrapping;
| '''S4a''' || square section with S4a type of transverse reinforcement with or without external FRP wrapping;
|-
|-
| S4b || square section with S4b type of transverse reinforcement with or without external FRP wrapping;
| '''S4b''' || square section with S4b type of transverse reinforcement with or without external FRP wrapping;
|-
|-
| S5 || square section with S5 type of transverse reinforcement with or without external FRP wrapping;
| '''S5''' || square section with S5 type of transverse reinforcement with or without external FRP wrapping;
|-
|-
| C || circular section with or without external FRP wrapping;
| '''C''' || circular section with or without external FRP wrapping;
|-
|-
| R || rectangular section with or without external FRP wrapping.
| '''R''' || rectangular section with or without external FRP wrapping.
|}
|}


2) The confined concrete ultimate strain is defined using -epscu or -gamma. If -gamma option, $gamma specified is the ratio of the strength corresponding to ultimate strain to the peak strength of the confined concrete stress-strain curve. If $gamma cannot be achieved in the range [0, $epscuLimit] then $epscuLimit (optional, default: 0.05) will be assumed as ultimate strain.
[[File:SectionTypes.png|300px]]


3) Poisson's Ratio is specified by one of 3 methods: a)providing $nu using the -nu option. b)using the -varUB option in which  Poisson’s ratio is defined as a function of axial strain by means of the expression proposed by Braga et al. (2006) with the upper bound equal to 0.5; or c) using the -varNoUB option in which case Poisson’s ratio is defined as a function of axial strain by means of the expression proposed by Braga et al. (2006) without any upper bound.
2) The confined concrete ultimate strain is defined using '''-epscu''' or '''-gamma'''. When '''-gamma''' option is specified, '''$gamma''' is the ratio of the strength corresponding to ultimate strain to the peak strength of the confined concrete stress-strain curve. If '''$gamma''' cannot be achieved in the range [0, '''$epscuLimit'''] then '''$epscuLimit''' (optional, default: 0.05) will be assumed as ultimate strain.


4) $L1, $L2 and $L3 must be used for S4a and S4b section types. $l1 and $L2 must be used for rectangular section.
3) Poisson's Ratio is specified by one of these 3 methods: a) providing '''$nu''' using the '''-nu''' option. b) using the '''-varUB''' option in which  Poisson’s ratio is defined as a function of axial strain by means of the expression proposed by Braga et al. (2006) with the upper bound equal to 0.5; or c) using the '''-varNoUB''' option in which case Poisson’s ratio is defined as a function of axial strain by means of the expression proposed by Braga et al. (2006) without any upper bound.
 
4) '''$L1''' (2l), '''$L2''' (a) and '''$L3''' (b) are required when either S4a or S4b section types is used. '''$L1''' (2d) and '''$L2''' (2c) must be used for rectangular section.
 
5) When external stengthening is used must be specified the following parameters:
 
{|
| '''$cover''' || cover thickness measured from the outer line of hoop.
|-
| '''$Am''' || total area of FRP wraps (number of layers x wrap thickness x wrap width).
|-
| '''$Sw''' || spacing of FRP wraps (if continuous wraps are used the spacing is equal to the wrap width).
|-
| '''$ful''' || ultimate strength of FRP wraps.
|-
| '''$Es0w''' || elastic modulus of FRP wraps.
|}
 
6) Stresses
 and
 strains
 can
 be
 defined
 either
 as
 positive
 or
 as
 negative
 values.
 All
 commands
 are 
not 
case 
sensitive.





EXAMPLES:
EXAMPLES:


'''Square 
section 
reinforced 
by 
simple 
transverse 
hoop
 and
 by
 additional
 FRP
 wraps 
(Section
 S1)'''
[[File:S1.png|500px]]
''Section S1''
<source lang="tcl">
#uniaxialMaterial ConfinedConcrete01 $tag  $secType $fpc  $Ec    -epscu $epscu  $nu  $L1  $phis  $S  $fyh  $Es0  $haRatio  $mu  $phiLon  -stRatio  $stRatio
uniaxialMaterial ConfinedConcrete01    1    S1    -30.0  26081.0 -epscu -0.03 -varub 300.0 10.0 100.0 300.0 206000.0    0.0  1000.0  16.0  -stRatio    0.85
</source>
''Section S1 strengthened by additional FRP wraps''
<source lang="tcl">
#uniaxialMaterial ConfinedConcrete01 $tag  $secType $fpc  $Ec    -epscu $epscu  $nu  $L1  $phis  $S  $fyh  $Es0  $haRatio  $mu  phiLon      $cover $Am    $Sw  $ful    $Es0w    -stRatio  $stRatio
uniaxialMaterial ConfinedConcrete01  1      S1    -30.0  26081.0 -epscu -0.03 -varub 300.0  10.0  100.0 300.0 206000.0  0.0  1000.0  16.0 -wrap  30.0  51.0  100.0 3900.0 230000.0  -stRatio  0.85
</source>
'''Square 
section 
reinforced 
by 
multiple 
transverse 
hoop
 and
 by
 additional
 FRP
 wraps 
(Section
 S4a)'''
[[File:S4a.png|500px]]
''Section S4a''
<source lang="tcl">
#uniaxialMaterial ConfinedConcrete01 $tag $secType $fpc  $Ec    -epscu $epscu $nu    $L1  $L2  $L3  $phis $S    $fyh  $Es0    $haRatio $mu    $phiLon -stRatio $stRatio
uniaxialMaterial ConfinedConcrete01  1    S4a      -30.0 26081.0 -epscu -0.03  -varUB 300.0 200.0 100.0 10.0  100.0 300.0 206000.0  0.0    1000.0 16.0    -stRatio  0.85
</source>
''Section S4a strengthened by additional FRP wraps''
<source lang="tcl">
#uniaxialMaterial ConfinedConcrete01 $tag $secType $fpc  $Ec    -epscu $epscu $nu    $L1  $L2  $L3  $phis $S    $fyh  $Es0    $haRatio $mu    $phiLon      $cover $Am  $Sw  $ful  $Es0w    -stRatio $stRatio
uniaxialMaterial ConfinedConcrete01  1    S4a      -30.0 26081.0 -epscu -0.03  -varUB 300.0 200.0 100.0 10.0  100.0 300.0 206000.0 0.0      1000.0 16.0  -wrap 30.0  51.0 100.0 3900.0 230000.0 -stRatio 0.85
</source>
'''Rectangular 
section 
reinforced 
by 
simple 
transverse 
hoop
 and
 by
 additional
 FRP
 wraps 
(Section
 R)'''
[[File:R.png|500px]]
''Section R''
<source lang="tcl">
#uniaxialMaterial ConfinedConcrete01 $tag $secType $fpc  $Ec    -epscu $epscu $nu    $L1  $L2  $phis $S    $fyh  $Es0    $haRatio $mu    $phiLon -stRatio $stRatio
uniaxialMaterial ConfinedConcrete01  1    R        -30.0 26081.0 -epscu -0.03  -varUB 500.0 300.0 10.0  100.0 300.0 206000.0 0.0      1000.0 16.0    -stRatio 0.85
</source>
''Section R strengthened by additional FRP wraps''
<source lang="tcl">
#uniaxialMaterial ConfinedConcrete01 $tag $secType $fpc  $Ec    -epscu $epscu $nu    $L1  $L2  $phis $S    $fyh  $Es0    $haRatio $mu    $phiLon      $cover $Am  $Sw  $ful  $Es0w    -stRatio $stRatio
uniaxialMaterial ConfinedConcrete01  1    R        -30.0 26081.0 -epscu -0.03  -varUB 500.0 300.0 10.0  100.0 300.0 206000.0 0.0      1000.0 16.0    -wrap 30.0  51.0 100.0 3900.0 230000.0 -stRatio 0.85 
</source>
----


REFEERENCES:
REFEERENCES:
Line 92: Line 162:
#Braga, F., Gigliotti, R., Laterza, M., 2006. “Analytical stress-strain relationship for concrete confined by steel stirrups and/or FRP jackets”. Journal of Structural Engineering ASCE,  132(9), 1402-1416.
#Braga, F., Gigliotti, R., Laterza, M., 2006. “Analytical stress-strain relationship for concrete confined by steel stirrups and/or FRP jackets”. Journal of Structural Engineering ASCE,  132(9), 1402-1416.
#D’Amato M., February 2009. “Analytical models for non linear analysis of RC structures: confined concrete and bond-slips of longitudinal bars”. Doctoral Thesis. University of Basilicata, Potenza, Italy.
#D’Amato M., February 2009. “Analytical models for non linear analysis of RC structures: confined concrete and bond-slips of longitudinal bars”. Doctoral Thesis. University of Basilicata, Potenza, Italy.
#D'Amato, M., Braga, F., Gigliotti, R., Kunnath S., Laterza, M., 2012. “A numerical general-purpose confinement model for non-linear analysis of R/C members”. Computers and Structures Journal, Elsevier,  Vol. 102-103, 64-75.
#Karsan, I. D., Jirsa, J. O., 1969. “Behavior of concrete under compressive loadings”, Journal of Structural Division ASCE, 95(12), 2543-2563.  
#Karsan, I. D., Jirsa, J. O., 1969. “Behavior of concrete under compressive loadings”, Journal of Structural Division ASCE, 95(12), 2543-2563.  


Latest revision as of 17:45, 22 January 2013




This 
command 
is 
used 
to 
construct 
an 
uniaxial
 material 
object 
of 
confined
 concrete 
in 
according 
to
 the
 work 
of 
Braga, 
Gigliotti
 and 
Laterza
 (2006). 
The
 confined
 concrete 
model
 (BGL
model) 
has 
not
 tensile
 strength 
and 
degraded
 linear 
unloading/reloading
 stiffness
 as 
proposed
 by 
Karsan 
and 
Jirsa
 (1969).
 The 
BGL 
model 
accounts 
for 
confinement
 effects 
due
 to 
different 
arrangements 
of 
transverse
 reinforcement 
and/or
 external 
strengthening
 such
 as 
steel 
jackets 
or 
FRP 
wraps. 
The 

confinement 
effect 
along
 the 
column is described 
as 
well.
 In
 order 
to 
obtain 
th e
compressive 
envelope 
curve a
 non
 linear 
approach 
is 
performed
 at 
each
 increment
 of 
column
 axial
 strain.
The
 sougth
 curve 
is 
obtained
 crossing 
different 
stress‐strain
 relationships,
 each 
of 
which
 corresponding
 to 
a 
different
 level 
of 
confinement.
 Currently,
 the
 Attard
 and
 Setunge’s
 model
 is
 implemented
 in
 calculating
 each
 active
 curve
 of
 the
 confined
 concrete.
 IMPORTANT: the units to be used are MPa, mm.

uniaxialMaterial ConfinedConcrete01 $tag $secType $fpc $Ec (<-epscu $epscu> OR <-gamma $gamma>) (<-nu $nu> OR <-varub> OR <-varnoub>) $L1 ($L2) ($L3) $phis $S $fyh $Es0 $haRatio $mu $phiLon <-internal $phisi $Si $fyhi $Es0i $haRatioi $mui> <-wrap $cover $Am $Sw $fuil $Es0w> <-gravel> <-silica> <-tol $tol> <-maxNumIter $maxNumIter> <-epscuLimit $epscuLimit> <-stRatio $stRatio>
$tag integer tag identifying material.
$secType tag for the transverse reinforcement configuration. See NOTE 1.
$fpc unconfined cylindrical strength of concrete specimen.
$Ec initial elastic modulus of unconfined concrete.
<-epscu $epscu> OR <-gamma $gamma> confined concrete ultimate strain. See NOTE 2.
<-nu $nu> OR <-varub> OR <-varnoub> Poisson's Ratio. See NOTE 3.
$L1 length/diameter of square/circular core section measured respect to the hoop center line.
($L2), ($L3) additional dimensions when multiple hoops are being used. See NOTE 4.
$phis hoop diameter. If section arrangement has multiple hoops it refers to the external hoop.
$S hoop spacing.
$fyh yielding strength of the hoop steel.
$Es0 elastic modulus of the hoop steel.
$haRatio hardening ratio of the hoop steel.
$mu ductility factor of the hoop steel.
$phiLon diameter of longitudinal bars.
<-internal $phisi $Si $fyhi $Es0i $haRatioi $mui> optional parameters for defining the internal transverse reinforcement. If they are not specified they will be assumed equal to the external ones (for S2, S3, S4a, S4b and S5 typed).
<-wrap $cover $Am $Sw $ful $Es0w> optional parameters required when section is strengthened with FRP wraps. See NOTE 5.

NOTES:

1) The following section types are available:

S1 square section with S1 type of transverse reinforcement with or without external FRP wrapping;
S2 square section with S2 type of transverse reinforcement with or without external FRP wrapping;
S3 square section with S3 type of transverse reinforcement with or without external FRP wrapping;
S4a square section with S4a type of transverse reinforcement with or without external FRP wrapping;
S4b square section with S4b type of transverse reinforcement with or without external FRP wrapping;
S5 square section with S5 type of transverse reinforcement with or without external FRP wrapping;
C circular section with or without external FRP wrapping;
R rectangular section with or without external FRP wrapping.

2) The confined concrete ultimate strain is defined using -epscu or -gamma. When -gamma option is specified, $gamma is the ratio of the strength corresponding to ultimate strain to the peak strength of the confined concrete stress-strain curve. If $gamma cannot be achieved in the range [0, $epscuLimit] then $epscuLimit (optional, default: 0.05) will be assumed as ultimate strain.

3) Poisson's Ratio is specified by one of these 3 methods: a) providing $nu using the -nu option. b) using the -varUB option in which Poisson’s ratio is defined as a function of axial strain by means of the expression proposed by Braga et al. (2006) with the upper bound equal to 0.5; or c) using the -varNoUB option in which case Poisson’s ratio is defined as a function of axial strain by means of the expression proposed by Braga et al. (2006) without any upper bound.

4) $L1 (2l), $L2 (a) and $L3 (b) are required when either S4a or S4b section types is used. $L1 (2d) and $L2 (2c) must be used for rectangular section.

5) When external stengthening is used must be specified the following parameters:

$cover cover thickness measured from the outer line of hoop.
$Am total area of FRP wraps (number of layers x wrap thickness x wrap width).
$Sw spacing of FRP wraps (if continuous wraps are used the spacing is equal to the wrap width).
$ful ultimate strength of FRP wraps.
$Es0w elastic modulus of FRP wraps.

6) Stresses
 and
 strains
 can
 be
 defined
 either
 as
 positive
 or
 as
 negative
 values.
 All
 commands
 are 
not 
case 
sensitive.



EXAMPLES:

Square 
section 
reinforced 
by 
simple 
transverse 
hoop
 and
 by
 additional
 FRP
 wraps 
(Section
 S1)

Section S1 

#uniaxialMaterial ConfinedConcrete01 $tag  $secType $fpc   $Ec    -epscu $epscu  $nu   $L1  $phis  $S   $fyh   $Es0   $haRatio  $mu   $phiLon  -stRatio  $stRatio
uniaxialMaterial ConfinedConcrete01    1     S1    -30.0  26081.0 -epscu -0.03 -varub 300.0 10.0 100.0 300.0 206000.0    0.0   1000.0   16.0   -stRatio    0.85

Section S1 strengthened by additional FRP wraps 

#uniaxialMaterial ConfinedConcrete01 $tag  $secType $fpc   $Ec    -epscu $epscu  $nu   $L1  $phis   $S   $fyh   $Es0   $haRatio  $mu  phiLon      $cover $Am    $Sw  $ful    $Es0w    -stRatio  $stRatio
uniaxialMaterial ConfinedConcrete01   1      S1    -30.0  26081.0 -epscu -0.03 -varub 300.0  10.0  100.0 300.0 206000.0  0.0   1000.0  16.0 -wrap  30.0  51.0  100.0 3900.0 230000.0  -stRatio   0.85

Square 
section 
reinforced 
by 
multiple 
transverse 
hoop
 and
 by
 additional
 FRP
 wraps 
(Section
 S4a)

Section S4a 

#uniaxialMaterial ConfinedConcrete01 $tag $secType $fpc  $Ec     -epscu $epscu $nu    $L1   $L2   $L3   $phis $S    $fyh  $Es0     $haRatio $mu    $phiLon -stRatio $stRatio
uniaxialMaterial ConfinedConcrete01  1    S4a      -30.0 26081.0 -epscu -0.03  -varUB 300.0 200.0 100.0 10.0  100.0 300.0 206000.0  0.0     1000.0 16.0    -stRatio  0.85

Section S4a strengthened by additional FRP wraps 

#uniaxialMaterial ConfinedConcrete01 $tag $secType $fpc  $Ec     -epscu $epscu $nu    $L1   $L2   $L3   $phis $S    $fyh  $Es0     $haRatio $mu    $phiLon      $cover $Am  $Sw   $ful   $Es0w    -stRatio $stRatio
uniaxialMaterial ConfinedConcrete01  1    S4a      -30.0 26081.0 -epscu -0.03  -varUB 300.0 200.0 100.0 10.0  100.0 300.0 206000.0 0.0      1000.0 16.0   -wrap 30.0   51.0 100.0 3900.0 230000.0 -stRatio 0.85

Rectangular 
section 
reinforced 
by 
simple 
transverse 
hoop
 and
 by
 additional
 FRP
 wraps 
(Section
 R)


Section R 

#uniaxialMaterial ConfinedConcrete01 $tag $secType $fpc  $Ec     -epscu $epscu $nu    $L1   $L2   $phis $S    $fyh  $Es0     $haRatio $mu    $phiLon -stRatio $stRatio
uniaxialMaterial ConfinedConcrete01  1    R        -30.0 26081.0 -epscu -0.03  -varUB 500.0 300.0 10.0  100.0 300.0 206000.0 0.0      1000.0 16.0    -stRatio 0.85

Section R strengthened by additional FRP wraps 

#uniaxialMaterial ConfinedConcrete01 $tag $secType $fpc  $Ec     -epscu $epscu $nu    $L1   $L2   $phis $S    $fyh  $Es0     $haRatio $mu    $phiLon       $cover $Am  $Sw   $ful   $Es0w    -stRatio $stRatio
uniaxialMaterial ConfinedConcrete01  1    R        -30.0 26081.0 -epscu -0.03  -varUB 500.0 300.0 10.0  100.0 300.0 206000.0 0.0      1000.0 16.0    -wrap 30.0   51.0 100.0 3900.0 230000.0 -stRatio 0.85


REFEERENCES:

  1. Attard, M. M., Setunge, S., 1996. “Stress-strain relationship of confined and unconfined concrete”. Material Journal ACI, 93(5), 432-444
  2. Braga, F., Gigliotti, R., Laterza, M., 2006. “Analytical stress-strain relationship for concrete confined by steel stirrups and/or FRP jackets”. Journal of Structural Engineering ASCE, 132(9), 1402-1416.
  3. D’Amato M., February 2009. “Analytical models for non linear analysis of RC structures: confined concrete and bond-slips of longitudinal bars”. Doctoral Thesis. University of Basilicata, Potenza, Italy.
  4. D'Amato, M., Braga, F., Gigliotti, R., Kunnath S., Laterza, M., 2012. “A numerical general-purpose confinement model for non-linear analysis of R/C members”. Computers and Structures Journal, Elsevier, Vol. 102-103, 64-75.
  5. Karsan, I. D., Jirsa, J. O., 1969. “Behavior of concrete under compressive loadings”, Journal of Structural Division ASCE, 95(12), 2543-2563.


Code Developed by: Michele D'Amato, University of Basilicata, Italy

Retrieved from "https://opensees.ist.berkeley.edu/wiki/index.php?title=ConfinedConcrete01_Material&oldid=10308"