Dears friends,
How can be define 'tension strain in extreme tensile steel fiber' for column fiber FE model ?! Is it defined as follows ?!
recorder Element -file SecSteel.out -time -ele1 section1 fiber -$ro 0. $IDreinf stressStrain (ro=Diameter/2)
Please, your suggestions will be very useful for me.
tension strain in extreme tensile steel fiber
Moderators: silvia, selimgunay, Moderators
-
parasismique
- Posts: 58
- Joined: Tue Dec 13, 2016 7:14 am
- Location: University of Tlemcen-Algeria
Re: tension strain in extreme tensile steel fiber
That should work, with space between 'ele' and '1' and between 'section' and '1'.
-
selimgunay
- Posts: 916
- Joined: Mon Sep 09, 2013 8:50 pm
- Location: University of California, Berkeley
Re: tension strain in extreme tensile steel fiber
If there is no fiber, the center of which exactly matches the coordinates that you specify, then it will record the closest fiber to these coordinates.
-
selimgunay
- Posts: 916
- Joined: Mon Sep 09, 2013 8:50 pm
- Location: University of California, Berkeley
Re: tension strain in extreme tensile steel fiber
Also please see the syntax here under Sections
https://opensees.berkeley.edu/OpenSees/ ... al/259.htm
https://opensees.berkeley.edu/OpenSees/ ... al/259.htm