Hi friends ,
I have a model of single story RC frame using pingching4 and concrete02 material. Structure considering only 4 nodes runs perfectly and results are ok.
After this analysis, I put some extra node on column and beam member without changing any materials and elements, while running the analysis It shows that convergence failed. So pleased help me how to make continuity on nodes.
Convergence Problem During Cyclic Pushover Analysis
Moderators: silvia, selimgunay, Moderators
-
romaniitd
- Posts: 7
- Joined: Fri Apr 03, 2015 1:30 am
- Location: Indian Institute of Technology Tirupati (IIT Tp)
Convergence Problem During Cyclic Pushover Analysis
Last edited by romaniitd on Wed May 27, 2015 8:53 pm, edited 1 time in total.
Re: Convergence Problem During Cyclic Pushover Analysis
if you just add nodes you have to constrain them using either the fix or equalDOF command.