how to read the .out document into matlab?

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
zhmkitten
Posts: 11
Joined: Thu Oct 25, 2007 4:49 pm
Location: UC, Davis

how to read the .out document into matlab?

Post by zhmkitten »

dear all,
I want use the eigenvector outputed by opensees in matlab to calculate the modal participate factor and some parameters. you know , I am doing the nonlinear analysis. so the stiffness is changing during the process, so is the eigenvector.
and then I want to input the parameter got from the matlab back to the opensees . the whole process just like the adaptive pushover.
thx all of your great help and attention!
Top
silvia
Posts: 3909
Joined: Tue Jan 11, 2005 7:44 am
Location: Degenkolb Engineers
Contact:
Contact silvia

Post by silvia »

you should just do it all in Tcl, then, it'd be a lot easier.
Silvia Mazzoni, PhD
Structural Consultant
Degenkolb Engineers
235 Montgomery Street, Suite 500
San Francisco, CA. 94104
Top
zhmkitten
Posts: 11
Joined: Thu Oct 25, 2007 4:49 pm
Location: UC, Davis

Post by zhmkitten »

thanks, would you give me some more help about how to program this process with using tcl script?
Top
Post Reply

Return to “OpenSees.exe Users”