Problems running OpenSeesSP
Posted: Wed Sep 07, 2011 11:45 pm
Hello,
I am having some issues running the parallel version of OpenSees. After some issues, I managed to compile the source code successfully, all three flavors (OpenSees, OpenSeesSP and OpenSeesMP).
Serial OpenSees seems to work well but, with the same example, OpenSeesSP aborts. The input is:
puts " -------------Elastic Model -------------"
puts " -------------Static Pushover Analysis -------------"
source Ex8.genericFrame3D.build.Wsec.tcl
source Ex8.genericFrame3D.analyze.Static.Push.tcl
(i.e., the example 8 from the example manual, at http://opensees.berkeley.edu/wiki/index ... _W-Section)
And the output returned after running it with 4 MPI processes is:
Slave Process Running 2
Master Process Running OpenSees Interpreter 0
OpenSees -- Open System For Earthquake Engineering Simulation
Pacific Earthquake Engineering Research Center -- 2.3.0
(c) Copyright 1999,2000 The Regents of the University of California
All Rights Reserved
(Copyright and Disclaimer @ http://www.berkeley.edu/OpenSees/copyright.html)
Slave Process Running 1
Slave Process Running 3
-------------Elastic Model -------------
-------------Static Pushover Analysis -------------
Number of Stories in Y: 2 Number of bays in X: 2 Number of bays in Z: 2
goGravity
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20201
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20301
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 30300
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 30301
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformL0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20102
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 30102
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20200
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20202
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 30200
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20300
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20302
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0301e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0302e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0203e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0302e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0303e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0301e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0301e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0302e+06
FEM_ObjectBrokerAllClasses::getNewRecordr - - no ConstraintHandler type exists for class tag 9
[grcn Element : 1.0201e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0201e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0201e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0201e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0201e+06
FEM_ObjectBrokerAllClasses::getNewRecordr - - no ConstraintHandler type exists for class tag 9
[host1:05348] *** An error occurred in MPI_Recv
[host1:05348] *** on communicator MPI_COMM_Beam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0203e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0301e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0302e+06
FEM_ObjectBrokerAllClasses::getNewRecordr - - no ConstraintHandler type exists for class tag 9
[host1:05349] *** An error occurred in MPI_Recv
[host1:05349] *** on communicator MPI_COMM_WORLD
[host1:05349] *** MPI_ERR_TRUNCATE: message truncated
[host1:05349] *** MPI_ERRORS_ARE_FATAL (goodbye)
a030:05347] *** An error occurred in MPI_Recv
[host1:05347] *** on communicator MPI_COMM_WORLD
[host1:05347] *** MPI_ERR_TRUNCATE: message truncated
[host1:05347] *** MPI_ERRORS_ARE_FATAL (goodbye)
WORLD
[host1:05348] *** MPI_ERR_TRUNCATE: message truncated
[host1:05348] *** MPI_ERRORS_ARE_FATAL (goodbye)
mpirun noticed that job rank 0 with PID 5346 on node host1 exited on signal 15 (Terminated).
I'm using OpenSees 2.3.0 compiled with Open MPI 1.2.6 on Linux.
OpenSeesMP works well, but I assume it is repeating the same sequential processing 4 times and no parallelization is performed. Am I wrong?
I apologize for not providing more details, but I have a pure computing background and know nothing about earthquake engineering simulation, so I'm not completely sure if I am running the example correctly or not, if I made some mistake on compilation, if I am missing some library I did not link OpenSees with, if it is a bug... I can only tell you it is not a problem with Open MPI. Many other applications that we have work flawlessly.
Thanks in advance,
Rafa
I am having some issues running the parallel version of OpenSees. After some issues, I managed to compile the source code successfully, all three flavors (OpenSees, OpenSeesSP and OpenSeesMP).
Serial OpenSees seems to work well but, with the same example, OpenSeesSP aborts. The input is:
puts " -------------Elastic Model -------------"
puts " -------------Static Pushover Analysis -------------"
source Ex8.genericFrame3D.build.Wsec.tcl
source Ex8.genericFrame3D.analyze.Static.Push.tcl
(i.e., the example 8 from the example manual, at http://opensees.berkeley.edu/wiki/index ... _W-Section)
And the output returned after running it with 4 MPI processes is:
Slave Process Running 2
Master Process Running OpenSees Interpreter 0
OpenSees -- Open System For Earthquake Engineering Simulation
Pacific Earthquake Engineering Research Center -- 2.3.0
(c) Copyright 1999,2000 The Regents of the University of California
All Rights Reserved
(Copyright and Disclaimer @ http://www.berkeley.edu/OpenSees/copyright.html)
Slave Process Running 1
Slave Process Running 3
-------------Elastic Model -------------
-------------Static Pushover Analysis -------------
Number of Stories in Y: 2 Number of bays in X: 2 Number of bays in Z: 2
goGravity
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20201
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20301
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 30300
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 30301
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformL0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20102
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 30102
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20200
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20202
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 30200
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20300
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): 0
Transverse (z): 0
Axial (x): -0.0095
Element : 20302
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0301e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0302e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0203e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0302e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0303e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0301e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0301e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0302e+06
FEM_ObjectBrokerAllClasses::getNewRecordr - - no ConstraintHandler type exists for class tag 9
[grcn Element : 1.0201e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0201e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0201e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0201e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0201e+06
FEM_ObjectBrokerAllClasses::getNewRecordr - - no ConstraintHandler type exists for class tag 9
[host1:05348] *** An error occurred in MPI_Recv
[host1:05348] *** on communicator MPI_COMM_Beam3dUniformLoad - Reference load
Transverse (y): -0.307833
Transverse (z): 0
Axial (x): 0
Element : 1.0203e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0301e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0202e+06
MapOfTaggedObjects::addComponent - not adding as one with similar tag exists, tag: 0
WARNING: LoadPattern::addElementalLoad() - load could not be added
Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load
Transverse (y): -0.00783333
Transverse (z): 0
Axial (x): 0
Element : 2.0302e+06
FEM_ObjectBrokerAllClasses::getNewRecordr - - no ConstraintHandler type exists for class tag 9
[host1:05349] *** An error occurred in MPI_Recv
[host1:05349] *** on communicator MPI_COMM_WORLD
[host1:05349] *** MPI_ERR_TRUNCATE: message truncated
[host1:05349] *** MPI_ERRORS_ARE_FATAL (goodbye)
a030:05347] *** An error occurred in MPI_Recv
[host1:05347] *** on communicator MPI_COMM_WORLD
[host1:05347] *** MPI_ERR_TRUNCATE: message truncated
[host1:05347] *** MPI_ERRORS_ARE_FATAL (goodbye)
WORLD
[host1:05348] *** MPI_ERR_TRUNCATE: message truncated
[host1:05348] *** MPI_ERRORS_ARE_FATAL (goodbye)
mpirun noticed that job rank 0 with PID 5346 on node host1 exited on signal 15 (Terminated).
I'm using OpenSees 2.3.0 compiled with Open MPI 1.2.6 on Linux.
OpenSeesMP works well, but I assume it is repeating the same sequential processing 4 times and no parallelization is performed. Am I wrong?
I apologize for not providing more details, but I have a pure computing background and know nothing about earthquake engineering simulation, so I'm not completely sure if I am running the example correctly or not, if I made some mistake on compilation, if I am missing some library I did not link OpenSees with, if it is a bug... I can only tell you it is not a problem with Open MPI. Many other applications that we have work flawlessly.
Thanks in advance,
Rafa