How to define an element, with Hysteretic Bilinear model w/o

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
cctvcctv
Posts: 48
Joined: Mon Apr 04, 2005 9:45 pm
Location: UC Irvine-Utah State University

How to define an element, with Hysteretic Bilinear model w/o

Post by cctvcctv »

How to define an element, with Hysteretic Bilinear model without damage, pinching force, etc.

which only have two lines of skeleton( pre-yield, post-yield)

thanks!
Top
berktaftali
Posts: 68
Joined: Fri Jul 02, 2004 6:10 am
Location: Computers and Structures, Inc.

Post by berktaftali »

Try Steel01 with no hardening...
Berk Taftali
Georgia Institute of Technology
Ph.D. Candidate, Structural Engineering, Mechanics, and Materials
School of Civil and Environmental Engineering
Atlanta, GA 30332 USA
Email: gte994y@mail.gatech.edu
Top
cctvcctv
Posts: 48
Joined: Mon Apr 04, 2005 9:45 pm
Location: UC Irvine-Utah State University

Post by cctvcctv »

thanks,

i will use this model steel01 to simulate isolator.
Top
Post Reply

Return to “OpenSees.exe Users”