Dear FMK,
I download the code of the OpenSees2.2.2, and I build up the OpenSees.exe. I use this exe file to run an example of “Pushover Analysis of 2-Story Moment Frame”, but I have some convergence problem. But if I use the OpenSees.exe download directly from the web, there is no this convergence problem.
So it seems that the exe file I build is not as good as the exe file from the OpenSees web site about the convergence. So would you please teach me how to improve the convergence of the exe file (how to change some settings in the Visual Stuido)? Thank you very much!
Convergence in building the OpenSees.exe
Moderators: silvia, selimgunay, Moderators
-
burnningcat
- Posts: 50
- Joined: Mon Jun 18, 2007 1:10 am
- Location: ROMA
-
sumtsang959
- Posts: 1
- Joined: Mon May 09, 2011 11:03 pm
- Location: Canada
- Contact:
Re: Convergence in building the OpenSees.exe
What should i do with those refurbish pipes?