problem in getting recorder Beamcolumnjointelement

[zareian1]

hi Dear vesna
I am studying the beam column joint model in the OpenSees Manual.
I am modelling 2d beamcolumn joint my model without any error and warning run but I couldn't get output files (recorder).
i use the following recorders .

recorder Element 7 -file RBbt.out node2BarSlipB stressStrain
recorder Element 7 -file Sp.out shearpanel stressStrain
recorder Element 7 -file Jdf.out deformation

How can I get the output files?

please help me.

thank you for your attention.

[fmk]

go look at the manual. your recorder commands are way off, so far off they cannot be fixed!

[dricardosalinas]

Hi, I hope you are doing well!

The error is that you are using the same structure that the beamjoint example provided by Mitra [2003]. So try this:

recorder Element -file node3BarSlipLeft.out -ele 7 node3BarSlipR stressStrain

Thus from http://opensees.berkeley.edu/OpenSees/m ... l/1120.htm

'node3BarSlipL' - returns the load-deformation response history of the Bar-Slip spring on the Left at node 3

I hope you find this useful

D.S.

[hamed739]

hi zareian1,
i am master student that search on beam column joint.
i write 2D frame with beam column program joint in opensees and it has error.
please send me your email that we could have conference.
my email:hamed739maz@yahoo.com
thanks.

[Jimt]

dricardosalinas wrote:
> Hi, I hope you are doing well!
>
> The error is that you are using the same structure that the beamjoint
> example provided by Mitra [2003]. So try this:
>
> recorder Element -file node3BarSlipLeft.out -ele 7 node3BarSlipR
> stressStrain
>
> Thus from http://opensees.berkeley.edu/OpenSees/m ... l/1120.htm
>
> 'node3BarSlipL' - returns the load-deformation response history of the
> Bar-Slip spring on the Left at node 3
>
> I hope you find this useful
>
> D.S.

Hi .
I have the same problem , and your answer help me to solve it .
Thanks .