BeamColumnJoint Element in Opensees 1.7.1 and above

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
divamva
Posts: 27
Joined: Wed Jun 30, 2004 6:52 am
Location: National Technical University of Athens

BeamColumnJoint Element in Opensees 1.7.1 and above

Post by divamva »

I am not sure if this is a bug or not but it seems that upgrading from Opensees 1.6.1 to 1.7.1 and above totally destroys any script that uses the Joint element.

What happens is that the script produces a straight black screen once an "analyze" command is issued and enters what seems to be an endless loop, even for the simplest of gravity loads.

Does anybody have any suggestions on this?
Top
silvia
Posts: 3909
Joined: Tue Jan 11, 2005 7:44 am
Location: Degenkolb Engineers
Contact:
Contact silvia

Post by silvia »

you should contact the element authors on this one, please.
Silvia Mazzoni, PhD
Structural Consultant
Degenkolb Engineers
235 Montgomery Street, Suite 500
San Francisco, CA. 94104
Top
Post Reply

Return to “OpenSees.exe Users”