openses is not working in my Laptop

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
maslam
Posts: 3
Joined: Wed Oct 12, 2011 2:41 am
Location: NED University of Engineering and Technology

openses is not working in my Laptop

Post by maslam »

Hi I already download the Tcl8.5 and opensees.exe and run in my Laptop according to instruction but its not working can you help me out.

Regards
Aslam Faqeer Mohammad
Student in La Sapienza university
chenwolf
Posts: 5
Joined: Sat Jun 04, 2011 10:45 pm
Location: xjtu

Re: openses is not working in my Laptop

Post by chenwolf »

It always works fine. Can you make sure run it according to instruction?
Maybe you should do it again.
maslam
Posts: 3
Joined: Wed Oct 12, 2011 2:41 am
Location: NED University of Engineering and Technology

Re: openses is not working in my Laptop

Post by maslam »

chenwolf wrote:
> It always works fine. Can you make sure run it according to instruction?
> Maybe you should do it again.
Can you give me how can I check its working well because i am a new user?
Can you give me few examples related to that?
vesna
Posts: 3033
Joined: Tue May 23, 2006 11:23 am
Location: UC Berkeley

Re: openses is not working in my Laptop

Post by vesna »

Try to follow instructions from getting started manual:
http://opensees.berkeley.edu/wiki/index ... ng_Started
sreedharrao144
Posts: 38
Joined: Thu Jun 17, 2010 7:08 am
Location: L&T EDRC KOLKATA

Re: openses is not working in my Laptop

Post by sreedharrao144 »

keep the opensees.exe in the same dierctory folder or drive where you installed active Tcl. If you are getting side to side configuration error then that is due to virus in your laptop( windows platform I am taking about).
Post Reply