Stiffness Matrix

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
nibas
Posts: 24
Joined: Thu Jun 09, 2005 12:25 am
Location: NTUA

Stiffness Matrix

Post by nibas »

I would like to ask you,

how could I have as output the stiffness matrix of my structure.

Thanks a lot,
Nibas
Civil Engineer
Ph.D. Candidate
Top
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:
Contact fmk

Post by fmk »

you can't with the .exe .. to do so you would have to edit the code yourself.
Top
nibas
Posts: 24
Joined: Thu Jun 09, 2005 12:25 am
Location: NTUA

Post by nibas »

Ok fmk,

Thank you, I will do it so
Nibas
Civil Engineer
Ph.D. Candidate
Top
Post Reply

Return to “OpenSees.exe Users”