OpenSees in Ubuntu 10

[dtopuzi]

Has anyone compiled OpenSees for Ubuntu 10? I was unsuccessful... beginner anyway
Posting the makefile.def would be very much appreciated.

Thank you in advance.

[fmk]

i suggest you post in the framework forum.

[nanii0711]

use wine software in ubuntu.. you can easily run opensees without any problems..

[arbarbosa]

Below is my Makefile.def for Ubuntu 10.04

[code]############################################################################
#
# Program: OpenSees
#
# Purpose: A Top-level Makefile to create the libraries needed
# to use the OpenSees framework.
#
# version created for Redhat 8.0 LINUX distribution and adapted
# for SUSE 9.3 Linux Distribution
#
# Written: fmk
# Created: 01/2003
#
# Changed: Andre R. Barbosa
# 10/2006 and updated in 04/2010 for Ubuntu 10.04
#
############################################################################

# %---------------------------------%
# | SECTION 1: PROGRAM |
# %---------------------------------%
#
# Specify the location and name of the OpenSees interpreter program
# that will be created (if this all works!)

OpenSees_PROGRAM = $(HOME)/bin/OpenSees

# %---------------------------------%
# | SECTION 2: MAKEFILE CONSTANTS |
# %---------------------------------%
#
# Specify the constants the are used as control structure variables in the Makefiles.

OPERATING_SYSTEM = LINUX
GRAPHICS = UsingOpenGL
PROGRAMMING_MODE = SEQUENTIAL

#DEBUG_MODE = DEBUG, NO_DEBUG
DEBUG_MODE = NO_DEBUG

#RELIABILITY = YES_RELIABILITY, NO_RELIABILITY
RELIABILITY = NO_RELIABILITY


# %---------------------------------%
# | SECTION 3: PATHS |
# %---------------------------------%
#
# Note: if vendor supplied BLAS and LAPACK libraries or if you have
# any of the libraries already leave the directory location blank AND
# remove the directory from DIRS.

BASE =
# PUT YOUR HOME DIRECTOREY HERE
HOME = /home/andre
FE = $(HOME)/OpenSees/SRC

BLASdir = $(HOME)/OpenSees/OTHER/BLAS
CBLASdir = $(HOME)/OpenSees/OTHER/CBLAS
LAPACKdir = $(HOME)/OpenSees/OTHER/LAPACK
ARPACKdir = $(HOME)/OpenSees/OTHER/ARPACK
UMFPACKdir = $(HOME)/OpenSees/OTHER/UMFPACK
METISdir = $(HOME)/OpenSees/OTHER/METIS
SRCdir = $(HOME)/OpenSees/SRC
SUPERLUdir = $(HOME)/OpenSees/OTHER/SuperLU_3.0/SRC
AMDdir = $(HOME)/OpenSees/OTHER/AMD

DIRS = $(BLASdir) \
$(CBLASdir) \
$(SUPERLUdir) \
$(LAPACKdir) \
$(ARPACKdir) \
$(UMFPACKdir) \
$(METISdir) \
$(AMDdir) \
$(SRCdir)

# %-------------------------------------------------------%
# | SECTION 4: LIBRARIES |
# | |
# | The following section defines the libraries that will |
# | be created and/or linked with when the libraries are |
# | being created or linked with. |
# %-------------------------------------------------------%
#
# Note: if vendor supplied BLAS and LAPACK libraries leave the
# libraries blank. You have to get your own copy of the tcl/tk
# library!!
#
# Note: For libraries that will be created (any in DIRS above)
# make sure the directory exsists where you want the library to go!

FE_LIBRARY = $(HOME)/lib/libOpenSees.a
NDARRAY_LIBRARY = $(HOME)/lib/libndarray.a # BJ_UCD jeremic@ucdavis.edu
MATMOD_LIBRARY = $(HOME)/lib/libmatmod.a # BJ_UCD jeremic@ucdavis.edu
BJMISC_LIBRARY = $(HOME)/lib/libBJmisc.a # BJ_UCD jeremic@ucdavis.edu
LAPACK_LIBRARY = $(HOME)/lib/libLapack.a
BLAS_LIBRARY = $(HOME)/lib/libBlas.a
SUPERLU_LIBRARY = $(HOME)/lib/libSuperLU.a
CBLAS_LIBRARY = $(HOME)/lib/libCBlas.a
ARPACK_LIBRARY = $(HOME)/lib/libArpack.a
UMFPACK_LIBRARY = $(HOME)/lib/libUmfpack.a
METIS_LIBRARY = $(HOME)/lib/libMetis.a
AMD_LIBRARY = $(HOME)/lib/libAmd.a

TCL_LIBRARY = /usr/lib/libtk8.5.so.0 \
/usr/lib/libtcl8.5.so.0

GRAPHIC_LIBRARY = -L/usr/X11/lib -lGL -lGLU

ifeq ($(RELIABILITY), YES_RELIABILITY)
RELIABILITY_LIBRARY = $(HOME)/lib/libReliability.a
else
RELIABILITY_LIBRARY =
endif


# WATCH OUT .. These libraries are removed when 'make wipe' is invoked.

WIPE_LIBS = $(FE_LIBRARY) \
$(NDARRAY_LIBRARY) \
$(MATMOD_LIBRARY) \
$(SUPERLU_LIBRARY) \
$(ARPACK_LIBRARY) \
$(UMFPACK_LIBRARY) \
$(METIS_LIBRARY) \
$(LAPACK_LIBRARY) \
$(BLAS_LIBRARY) \
$(AMD_LIBRARY) \
$(CBLAS_LIBRARY) \
$(RELIABILITY_LIBRARY)

# %---------------------------------------------------------%
# | SECTION 5: COMPILERS |
# | |
# | The following macros specify compilers, linker/loaders, |
# | the archiver, and their options. You need to make sure |
# | these are correct for your system. |
# %---------------------------------------------------------%

# ###################################################
# # Compilers
# ###################################################

CC++ = g++
CC = gcc
FC = gcc
F90 =
LINKER = g++

AR = ar
ARFLAGS = cqls
RANLIB = ranlib
RANLIBFLAGS =


GRAPHIC_FLAG = -D_GLX
PROGRAMMING_FLAG =

ifeq ($(RELIABILITY), YES_RELIABILITY)
RELIABILITY_FLAG = -D_RELIABILITY
else
RELIABILITY_FLAG =
endif

ifeq ($(DEBUG_MODE), DEBUG)
DEBUG_FLAG = -D_G3DEBUG
else
DEBUG_FLAG =
endif

ifeq ($(DEBUG_MODE), DEBUG)

C++FLAGS = -Wall -g -pg -D_TCL85 -D_LINUX -D_UNIX $(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) $(PROGRAMMING_FLAG)
CFLAGS = -Wall -g -pg $(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) $(PROGRAMMING_FLAG)
FFLAGS = -Wall
LINKFLAGS = -rdynamic -g -pg

else

C++FLAGS = -Wall -D_TCL85 -D_LINUX -D_UNIX -Wall $(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) \
$(PROGRAMMING_FLAG) -funroll-loops -fcse-follow-jumps \
-fthread-jumps -fcse-skip-blocks -frerun-cse-after-loop \
-felide-constructors \
-fcaller-saves -ffloat-store -fforce-addr \
-fschedule-insns -fschedule-insns2 -D_LINUX -D_UNIX \
-fexpensive-optimizations \
-fforce-addr -finline-functions \
-fkeep-inline-functions \
-fno-function-cse -fno-inline -fno-peephole \
-fomit-frame-pointer \
-fschedule-insns -fschedule-insns2 \
-fstrength-reduce -fthread-jumps

CFLAGS = -Wall -O2 $(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) $(PROGRAMMING_FLAG)
FFLAGS = -Wall
LINKFLAGS = -rdynamic

endif

# Misc
MAKE = make
CD = cd
ECHO = echo
RM = rm
RMFLAGS = -f
SHELL = /bin/sh

# %---------------------------------------------------------%
# | SECTION 6: COMPILATION |
# | |
# | The following macros specify the macros used in |
# | to compile the source code into object code. |
# %---------------------------------------------------------%

.SUFFIXES:
.SUFFIXES: .C .c .f .f90 .cpp .o .cpp

#
# %------------------%
# | Default command. |
# %------------------%
#
.DEFAULT:
@$(ECHO) "Unknown target $@, try: make help"
#
# %-----------------------------------------------%
# | Command to build .o files from source files. |
# %-----------------------------------------------%
#

.cpp.o:
@$(ECHO) Making $@ from $<
$(CC++) $(C++FLAGS) $(INCLUDES) -c $< -o $@

.C.o:
@$(ECHO) Making $@ from $<
$(CC++) $(C++FLAGS) $(INCLUDES) -c $< -o $@

.c.o:
@$(ECHO) Making $@ from $<
$(CC) $(CFLAGS) -c $< -o $@

.f.o:
@$(ECHO) Making $@ from $<
$(FC) $(FFLAGS) -c $< -o $@

.f77.o:
@$(ECHO) Making $@ from $<
$(FC) $(FFLAGS) -c $< -o $@

.f90.o:
@$(ECHO) Making $@ from $<
$(FC90) $(FFLAGS) -c $< -o $@

# %---------------------------------------------------------%
# | SECTION 7: OTHER LIBRARIES |
# | |
# | The following macros specify other libraries that must |
# | be linked with when creating executables. These are |
# | platform specific and typically order does matter!! |
# %---------------------------------------------------------%
MACHINE_LINKLIBS = -L$(BASE)/lib \
-L$(HOME)/lib \




MACHINE_NUMERICAL_LIBS = -lm \
$(ARPACK_LIBRARY) \
$(SUPERLU_LIBRARY) \
$(UMFPACK_LIBRARY) \
$(LAPACK_LIBRARY) \
$(BLAS_LIBRARY) \
$(CBLAS_LIBRARY) \
$(GRAPHIC_LIBRARY)\
$(AMD_LIBRARY)\
$(RELIABILITY_LIBRARY)\
-ldl -lpng /usr/lib/libgfortran.so.3


ifeq ($(PROGRAMMING_MODE), THREADS)
MACHINE_SPECIFIC_LIBS = -lpthread
else
MACHINE_SPECIFIC_LIBS = -ldl -lieee -lm -lc -Wl,-rpath,/usr/local/lib
endif


# %---------------------------------------------------------%
# | SECTION 8: INCLUDE FILES |
# | |
# | The following macros specify include files needed for |
# | compilation. |
# %---------------------------------------------------------%

MACHINE_INCLUDES = -I/usr/include/tcl8.5/ \
-I/usr/local/BerkeleyDB.4.0/include \
-I/usr/include/mysql \
-I$(HOME)/include \
-I$(UMFPACKdir) \
-I$(SUPERLUdir)

# this file contains all the OpenSees/SRC includes
include $(FE)/Makefile.incl

INCLUDES = $(MACHINE_INCLUDES) $(TCL_INCLUDES) $(FE_INCLUDES)


[/code]