Plain handler

[kyungtae79]

Hello, all

I used 'equalDOF' using OpenSeesSP.
The constraints is used by Plain.

Then, I got the message following like:


WARNING PlainHandler::handle() - constraint at dof 4 already specified for constrained node in MP_Constraint at node 170400

Is the reason that I used 'Plain constraints'?

[fmk]

is node 170400 involved in a constraiint already?

[kyungtae79]

I used that node (170400) using 'equalDOF' to connect another node at the same location.

There is another question about 'recorder'.

I am using OpenSeesSP for my model.

I used recorder command of 'recorder file -xml bridge_nodes.txt...'.,

However, as I ran my scripts,
I got responses associated with some of nodes which I am interested in.
(e.g. I want to get results from nodes of 1,2,3,4,..10, however, I just got it from 2,3 nodes)

Or, I got nothing from that run.

Do you know how to get all responses?

Or, is there a way I can control the recorder?

- Here is my guess.

I just guess that the main run would be terminated before other runs are finished.
then, the outfile could not collect the information from other computation.

[fmk]

on the destruction of the recorders the processes do some sends & recvs on the data in the files .. can you try issuing the command remove recorders before the end of your script to see if the problem still occurs.

[kyungtae79]

I don't understand very well.

What you mean is..
to put the command out not to work the recorder.
then see how it is going on?

If I put the command there,
how can I check whether or not the recorder files will collect information?

[fmk]

no .. put the command remove recorders on the last line of your script.

[kyungtae79]

Is the command remove recorder
exactly "remove recorder"?

I can not look it up on the manual.

[fmk]

no .. it is "remove recorders"

[kyungtae79]

As you recommended, I put the "remove recorders" in the end of my scripts.

However, I still got some lack of output.

(From 3000 steps, I just got results of 243 steps.)

[BlueLotus]

The node 170400 is also involved in the constraint. I have used this node many times.

The term 'recorder' was what I wanted to know and thanks for the details you have shared here. I am also using OpenSeesSP, but never had to use the option recorder. Thanks for sharing.



Tech support