Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe
Moderators: silvia, selimgunay, Moderators
-
castonguay.pierre
- Posts: 14
- Joined: Mon Mar 30, 2009 5:28 am
- Location: Montreal, QC
-
Contact:
Post
by castonguay.pierre »
Hi all,
Is there any further documentation or references on Pinching4 and its parameters? Or are we limited to what is in the manual?
If there is, where can I find it?
Thanks,
/P
-
silvia
- Posts: 3909
- Joined: Tue Jan 11, 2005 7:44 am
- Location: Degenkolb Engineers
-
Contact:
Post
by silvia »
you might want to contact the material authors...
Silvia Mazzoni, PhD
Structural Consultant
Degenkolb Engineers
235 Montgomery Street, Suite 500
San Francisco, CA. 94104
-
castonguay.pierre
- Posts: 14
- Joined: Mon Mar 30, 2009 5:28 am
- Location: Montreal, QC
-
Contact:
Post
by castonguay.pierre »
I would normally have done that, but unfortunately there is a blank space next to "Contact author" in the manual...
Pierre
École Polytechnique de Montréal
QC, Canada
-
silvia
- Posts: 3909
- Joined: Tue Jan 11, 2005 7:44 am
- Location: Degenkolb Engineers
-
Contact:
Post
by silvia »
ask Dawn Lehman at University of Washington.
Silvia Mazzoni, PhD
Structural Consultant
Degenkolb Engineers
235 Montgomery Street, Suite 500
San Francisco, CA. 94104
-
castonguay.pierre
- Posts: 14
- Joined: Mon Mar 30, 2009 5:28 am
- Location: Montreal, QC
-
Contact:
Post
by castonguay.pierre »
Thanks Silvia!
Pierre
École Polytechnique de Montréal
QC, Canada