Pinching4

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
castonguay.pierre
Posts: 14
Joined: Mon Mar 30, 2009 5:28 am
Location: Montreal, QC
Contact:

Pinching4

Post by castonguay.pierre »

Hi all,

Is there any further documentation or references on Pinching4 and its parameters? Or are we limited to what is in the manual?

If there is, where can I find it?

Thanks,

/P
silvia
Posts: 3909
Joined: Tue Jan 11, 2005 7:44 am
Location: Degenkolb Engineers
Contact:

Post by silvia »

you might want to contact the material authors...
Silvia Mazzoni, PhD
Structural Consultant
Degenkolb Engineers
235 Montgomery Street, Suite 500
San Francisco, CA. 94104
castonguay.pierre
Posts: 14
Joined: Mon Mar 30, 2009 5:28 am
Location: Montreal, QC
Contact:

Post by castonguay.pierre »

I would normally have done that, but unfortunately there is a blank space next to "Contact author" in the manual...
Pierre
École Polytechnique de Montréal
QC, Canada
silvia
Posts: 3909
Joined: Tue Jan 11, 2005 7:44 am
Location: Degenkolb Engineers
Contact:

Post by silvia »

ask Dawn Lehman at University of Washington.
Silvia Mazzoni, PhD
Structural Consultant
Degenkolb Engineers
235 Montgomery Street, Suite 500
San Francisco, CA. 94104
castonguay.pierre
Posts: 14
Joined: Mon Mar 30, 2009 5:28 am
Location: Montreal, QC
Contact:

Post by castonguay.pierre »

Thanks Silvia!
Pierre
École Polytechnique de Montréal
QC, Canada
Post Reply