Recording stresses at gauss points, outputing m & k matr

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
simplicio
Posts: 4
Joined: Sun Aug 07, 2005 2:59 pm
Location: La Jolla, CA

Recording stresses at gauss points, outputing m & k matr

Post by simplicio »

1. Is it possible to record the stresses and strains at the gauss points for a shellMITC4 element.

2. Is there a command to output the Mass and Stiffness matrices.

Thanks
Top
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:
Contact fmk

Post by fmk »

1. not yet .. will be next time i release the .exe

2. no.
Top
Post Reply

Return to “OpenSees.exe Users”