Linux-compatible OpenSees version 2.0

[bayram_aygun]

Hi,

I am trying to use a large computer cluster,named Ada, at Rice University. "Ada" is running SuSE 9.0 Linux and the 2.6.5 kernel, with small changes made by Cray, particularly for their RapidArray interconnect.

The IT guys over here need a Linux-compatible OpenSees version. Where can I get it? Did anyone have any experience using OpenSees in a Linux machine?

Thanks for your help,

[fmk]

you have to build it .. or get me access to the machine so i can build it.

[bayram_aygun]

In that case, it doesn't seem easy for me to use OpenSees in our cluster.

Thanks Frank,

[ebe79442114]

I compiled opensees (SEQUENTIAL) on my linux debian 64 bit. I updated OS with cvs command to version 2.0.

this is Makefile.def

Code: Select all

############################################################################
#
#  Program:  OpenSees
#
#  Purpose:  A Top-level Makefile to create the libraries needed
#	     to use the OpenSees framework. Works on Linux version 6.1
#            and below.
#
#  Written: fmk 
#  Created: 10/99
#
#  Send bug reports, comments or suggestions to 
#
############################################################################

# %---------------------------------%
# |  SECTION 1: PROGRAM             |
# %---------------------------------%
#
# Specify the location and name of the OpenSees interpreter program
# that will be created (if this all works!)

OpenSees_PROGRAM = $(HOME)/bin/OpenSees

OPERATING_SYSTEM = LINUX
GRAPHICS = UsingOpenGL
PROGRAMMING_MODE = SEQUENTIAL
DEBUG_MODE = NO_DEBUG
RELIABILITY = NO_RELIABILITY


# %---------------------------------%
# |  SECTION 2: PATHS               |
# %---------------------------------%
#
# Note: if vendor supplied BLAS and LAPACK libraries or if you have
# any of the libraries already leave the directory location blank AND
# remove the directory from DIRS.

BASE		= /usr
HOME		= /root
FE		= $(HOME)/OpenSees/SRC

BLASdir      = $(HOME)/OpenSees/OTHER/BLAS
CBLASdir     = $(HOME)/OpenSees/OTHER/CBLAS
LAPACKdir    = $(HOME)/OpenSees/OTHER/LAPACK
SUPERLUdir   = $(HOME)/OpenSees/OTHER/SuperLU_3.0/SRC
ARPACKdir    = $(HOME)/OpenSees/OTHER/ARPACK
UMFPACKdir   = $(HOME)/OpenSees/OTHER/UMFPACK
METISdir       = $(HOME)/OpenSees/OTHER/METIS
SRCdir       = $(HOME)/OpenSees/SRC


DIRS        = $(BLASdir) $(CBLASdir) $(LAPACKdir) \
	$(SUPERLUdir) $(ARPACKdir) $(UMFPACKdir) $(SRCdir) $(METISdir)

# %-------------------------------------------------------%
# | SECTION 3: LIBRARIES                                  |
# |                                                       |
# | The following section defines the libraries that will |
# | be created and/or linked with when the libraries are  | 
# | being created or linked with.                         |
# %-------------------------------------------------------%
#
# Note: if vendor supplied BLAS and LAPACK libraries leave the
# libraries blank. You have to get your own copy of the tcl/tk 
# library!! 
#
# Note: For libraries that will be created (any in DIRS above)
# make sure the directory exsists where you want the library to go!

FE_LIBRARY      = $(HOME)/lib/libOpenSees.a
NDARRAY_LIBRARY = $(HOME)/lib/libndarray.a #
MATMOD_LIBRARY  = $(HOME)/lib/libmatmod.a  # 
BJMISC_LIBRARY  = $(HOME)/lib/libBJmisc.a  # 
LAPACK_LIBRARY  = $(HOME)/lib/libLapack.a
BLAS_LIBRARY    = $(HOME)/lib/libBlas.a
SUPERLU_LIBRARY = $(HOME)/lib/libSuperLU.a
CBLAS_LIBRARY   = $(HOME)/lib/libCBlas.a
ARPACK_LIBRARY  = $(HOME)/lib/libArpack.a
UMFPACK_LIBRARY = $(HOME)/lib/libUmfpack.a
METIS_LIBRARY   = $(HOME)/lib/libMetis.a
TCL_LIBRARY = /usr/lib/libtk8.4.so.0 /usr/lib/libX11.a /usr/lib/libtcl8.4.so
BLITZ_LIBRARY = $(HOME)/blitz/lib/libblitz.a
GRAPHIC_LIBRARY     = -L/usr/X11R6/lib -lX11 -lGL -lGLU 

# WATCH OUT .. These libraries are removed when 'make wipe' is invoked.
WIPE_LIBS	= $(FE_LIBRARY) \
		$(LAPACK_LIBRARY) \
		$(BLAS_LIBRARY) \
		$(CBLAS_LIBRARY) \
		$(SUPERLU_LIBRARY) \
		$(ARPACK_LIBRARY) \
		$(UMFPACK_LIBRARY) \
	        $(METIS_LIBRARY)

# %---------------------------------------------------------%
# | SECTION 4: COMPILERS                                    |
# |                                                         |
# | The following macros specify compilers, linker/loaders, |
# | the archiver, and their options.  You need to make sure |
# | these are correct for your system.                      |
# %---------------------------------------------------------%

# Compilers
CC++	= /usr/bin/g++
CC      = /usr/bin/gcc
FC	= /usr/bin/gfortran

AR		= ar 
ARFLAGS		= cqls
RANLIB		= ranlib
RANLIBFLAGS     =

# Compiler Flags
#
# NOTES:

#    C++ FLAGS TAKE need _UNIX or _WIN32 for preprocessor dircetives
#         - the _WIN32 for the Windows95/98 or NT operating system.
#    C FLAGS used -DUSE_VENDOR_BLAS (needed in SuperLU) if UNIX in C++ FLAGS
#

# modified as optimizaton currently causing problems with Steeln01 code
ifeq ($(DEBUG_MODE), DEBUG)

C++FLAGS         = -Wall -D_LINUX -D_UNIX -D_TCL84   \
		$(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) $(PROGRAMMING_FLAG) \
	         -g -pg 
	      

CFLAGS          = -Wall -pg $(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) $(PROGRAMMING_FLAG)
FFLAGS          = -Wall 

# Linker
LINKER          = $(CC++)
LINKFLAGS       = -g -pg

else

C++FLAGS         = -Wall -D_LINUX -D_UNIX  -D_TCL84  \
	$(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) \
	$(PROGRAMMING_FLAG) -O3 -ffloat-store 
CFLAGS          = -Wall -O2
FFLAGS          = -Wall -O

# Linker
LINKER          = $(CC++)
LINKFLAGS       = -rdynamic -Wl

endif


GRAPHIC_FLAG = -D_GLX

# Misc
MAKE		= make
CD              = cd
ECHO            = echo
RM              = rm
RMFLAGS         = -f
SHELL           = /bin/sh
#SHELL		= /bin/bash

# %---------------------------------------------------------%
# | SECTION 5: COMPILATION                                  |
# |                                                         |
# | The following macros specify the macros used in         |
# | to compile the source code into object code.            |
# %---------------------------------------------------------%

.SUFFIXES:
.SUFFIXES:	.C .c .f .f90 .cpp .o .cpp

#
# %------------------%
# | Default command. |
# %------------------%
#
.DEFAULT:
	@$(ECHO) "Unknown target $@, try:  make help"
#
# %-------------------------------------------%
# |  Command to build .o files from .f files. |
# %-------------------------------------------%
#

.cpp.o:
	@$(ECHO) Making $@ from $<
	$(CC++) $(C++FLAGS) $(INCLUDES) -c $< -o $@

.C.o:
	@$(ECHO) Making $@ from $<
	$(CC++) $(C++FLAGS) $(INCLUDES) -c $< -o $@
.c.o:
	@$(ECHO) Making $@ from $<
	$(CC) $(CFLAGS) -c $< -o $@
.f.o:      
	@$(ECHO) Making $@ from $<
	$(FC) $(FFLAGS) -c $< -o $@

# %---------------------------------------------------------%
# | SECTION 6: OTHER LIBRARIES                              |
# |                                                         |
# | The following macros specify other libraries that must  |
# | be linked with when creating executables. These are     |
# | platform specific and typically order does matter!!     |
# %---------------------------------------------------------%
MACHINE_LINKLIBS  = -L$(BASE)/lib \
		-L$(HOME)/lib 

MACHINE_NUMERICAL_LIBS  = -lm \
		$(ARPACK_LIBRARY) \
		$(SUPERLU_LIBRARY) \
		$(UMFPACK_LIBRARY) \
	        $(LAPACK_LIBRARY) $(BLAS_LIBRARY) $(CBLAS_LIBRARY) \
		$(GRAPHIC_LIBRARY)\
		-ldl -lgfortran -lpng

MACHINE_SPECIFIC_LIBS = -L/usr/lib/gcc/x86_64-linux-gnu/4.3



# %---------------------------------------------------------%
# | SECTION 7: INCLUDE FILES                                |
# |                                                         |
# | The following macros specify include files needed for   |
# | compilation.                                            |
# %---------------------------------------------------------%
MACHINE_INCLUDES        = -I/usr/include \
			  -I$(BASE)/include \
			  -I/usr/include/cxx \
			  -I$(HOME)/include -I$(HOME)/blitz

# this file contains all the OpenSees/SRC includes
include $(FE)/Makefile.incl

TCL_INCLUDES =  -I/usr/include/tcl8.4 -I/usr/include/

INCLUDES = $(TCL_INCLUDES) $(FE_INCLUDES) $(MACHINE_INCLUDES)

-------------------------------------------------------------------
problem:
1- I couldn't compile it on my Dual core laptop (parallel), because i couldn't make suitable Makefile.def