eleLoad doesn't seem to work..

GeoCham · Post by **GeoCham** » Wed Jun 26, 2019 12:14 pm

eleLoad doesn't seem to work..
pattern Plain 1 Linear { eleLoad -ele 1 -type beamUniform -9.29615 0.0 0.0 }

ismailqeshta · Post by **ismailqeshta** » Wed Jun 26, 2019 9:55 pm

Can you provide more explanation for your problem?

Anyway,

I have had a problem with eleLoad a while ago, but it ultimately worked with me:
http://opensees.berkeley.edu/community/ ... =2&t=64317

GeoCham · Post by **GeoCham** » Wed Jun 26, 2019 11:02 pm

Is there a way to attach pics with this message? I'll try to attach a print-screen.

ismailqeshta · Post by **ismailqeshta** » Fri Jun 28, 2019 10:26 am

It is not possible. You can try to explain the problem or, if possible, copy the line of code that has the problem, and I will try to help you.

selimgunay · Post by **selimgunay** » Fri Jun 28, 2019 2:27 pm

It looks like you are applying the distributed load along the element axis (x local axis), you should apply it in y or z

ismailqeshta · Post by **ismailqeshta** » Sat Jun 29, 2019 4:23 am

Yes, I just noticed that. The load is applied at the local x-axis.

GeoCham · Post by **GeoCham** » Fri Aug 02, 2019 8:39 am

Still doesn't work.

The OpenSees Community