Implement New Material Model in Older OpenSees Version

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
joshwoods
Posts: 7
Joined: Thu Jan 24, 2013 6:47 am
Location: Carleton University

Implement New Material Model in Older OpenSees Version

Post by joshwoods »

Hello everyone,

I am using a new concrete material model that has been released in 32-bit OpenSees 3.0.0.

I am wondering if it is possible, and if yes, how difficult it would be to implement this new material in an older version of OpenSees. I know because the OpenSees source code is available it may be possible, but I am not familiar with these procedures. The hybrid testing system in our laboratory works well with an older version of OpenSees (2.5.0 rev 6248)/OpenFresco, so I want to see if it is possible to implement this new material model in that version of OpenSees.

If anyone has any advice it would be greatly appreciated.

Josh
Top
Post Reply

Return to “OpenSees.exe Users”