pushover converges, but low-week reciprocal calculations do

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
xiaojack
Posts: 16
Joined: Thu Oct 12, 2017 7:42 pm

pushover converges, but low-week reciprocal calculations do

Post by xiaojack »

WARNING: CTestNormDispIncr::test() - failed to converge
after: 200 iterations current Norm: 3.29482e+006 (max: 0.1, Norm deltaR: 7.44214e+009)
NewtnRaphson::solveCurrentStep() -the ConvergenceTest object failed in test()
StaticAnalysis::analyze() - the Algorithm failed at iteration: 0 with domain at load factor 5.22523e+011
OpenSees > analyze failed, returned: -3 error flag
WARNING: CTestNormDispIncr::test() - failed to converge
after: 200 iterations current Norm: 95765.5 (max: 0.1, Norm deltaR: 5.12428e+010)
NewtnRaphson::solveCurrentStep() -the ConvergenceTest object failed in test()
StaticAnalysis::analyze() - the Algorithm failed at iteration: 1 with domain at load factor -3.84005e+010
OpenSees > analyze failed, returned: -3 error flag
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: pushover converges, but low-week reciprocal calculations

Post by fmk »

not sure what you mean by "low-week reciprocal calculations"
xiaojack
Posts: 16
Joined: Thu Oct 12, 2017 7:42 pm

Re: pushover converges, but low-week reciprocal calculations

Post by xiaojack »

Low cycle,The loading method is inverted triangle
Post Reply